Portal de Periódicos da CAPES

Modeling and application of plasma charge current in deep penetration laser welding

2003; American Institute of Physics; Volume: 93; Issue: 11 Linguagem: Inglês

10.1063/1.1570951

1520-8850

Xudong Zhang, Wuzhu Chen, Ping Jiang, Jing Guo, Zhiling Tian,

Laser Material Processing Techniques

Plasma charge current distribution during deep penetration CO2 laser welding was analyzed theoretically and experimentally. The laser-induced plasma above the workpiece surface expands up to the nozzle, driven by the particle concentration gradient, forming an electric potential between the workpiece and the nozzle due to the large difference between the diffusion velocities of the ions and the electrons. The plasma-induced current obtained by electrically connecting the nozzle and the workpiece can be increased by adding a negative external voltage. For a fixed set of welding conditions, the plasma charge current increases with the external voltage to a saturation value. The plasma charge current decreases as the nozzle-to-workpiece distance increases. Therefore, closed-loop control of the nozzle-to-workpiece distance for laser welding can be based on the linear relationship between the plasma charge current and the distance. In addition, the amount of plasma above the keyhole can be reduced by a transverse magnetic field, which reduces the attenuation of the incident laser power by the plasma so as to increase the laser welding thermal efficiency.