Curing characteristics ofo-cresol novolac epoxy resin modified by bismaleimide
1996; Wiley; Volume: 34; Issue: 6 Linguagem: Inglês
10.1002/(sici)1099-0518(19960430)34
ISSN1099-0518
Autores Tópico(s)Synthesis and properties of polymers
ResumoJournal of Polymer Science Part A: Polymer ChemistryVolume 34, Issue 6 p. 957-962 Article Curing characteristics of o-cresol novolac epoxy resin modified by bismaleimide Whan Gun Kim, Corresponding Author Whan Gun Kim Department of Chemistry, Seokyeong University, 16-1, Jeongneung-Dong, Seongbuk-Ku, Seoul 136-100, KoreaDepartment of Chemistry, Seokyeong University, 16-1, Jeongneung-Dong, Seongbuk-Ku, Seoul 136-100, KoreaSearch for more papers by this authorTae Young Nam, Tae Young Nam Material and Device Research Center, Samsung Advanced Institute of Technology, P.O. Box 111, Suwon, Kyungki-Do, KoreaSearch for more papers by this author Whan Gun Kim, Corresponding Author Whan Gun Kim Department of Chemistry, Seokyeong University, 16-1, Jeongneung-Dong, Seongbuk-Ku, Seoul 136-100, KoreaDepartment of Chemistry, Seokyeong University, 16-1, Jeongneung-Dong, Seongbuk-Ku, Seoul 136-100, KoreaSearch for more papers by this authorTae Young Nam, Tae Young Nam Material and Device Research Center, Samsung Advanced Institute of Technology, P.O. Box 111, Suwon, Kyungki-Do, KoreaSearch for more papers by this author First published: 30 April 1996 https://doi.org/10.1002/(SICI)1099-0518(19960430)34:6 3.0.CO;2-FCitations: 26AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Abstract Curing characteristics of o-cresol novolac epoxy resin modified by 4,4-diaminodiphenylmethane bismaleimide (DDM-BMI) using FTIR were investigated and the glass transition temperature was measured. With the addition of DDM as hardener, the relative curing reaction conversion of DDM-BMI increased with equivalent weight ratio [R1 = (equiv wt summation of epoxy and DDM-BMI)/equiv wt of DDM] and weight ratio of epoxy and DDM-BMI (R2 = wt of epoxy resin/wt of DDM-BMI). Using phenol novolac resin (PN) as hardener, the curing reaction conversion of DDM-BMI was hardly changed, but the variation of that in the epoxy resin was observed with R2 change. © 1996 John Wiley & Sons, Inc. Citing Literature Volume34, Issue630 April 1996Pages 957-962 RelatedInformation
Referência(s)