Study on thermal conductive BN/novolac resin composites
2011; Elsevier BV; Volume: 523; Issue: 1-2 Linguagem: Inglês
10.1016/j.tca.2011.05.010
ISSN1872-762X
AutoresShasha Li, Shuhua Qi, Nailiang Liu, Peng Cao,
Tópico(s)High voltage insulation and dielectric phenomena
ResumoIn this study, γ-aminopropyltriethoxysilane-treated boron nitride (BN) particles were used to modify novolac resin. The effect of varying the BN concentration, particle size, and hybrid BN fillers with the binary particle size distribution on the thermal conductivity of the composites was investigated. Scanning electron microscopy (SEM) imaging showed homogeneously dispersed treated BN particles in the matrix. Furthermore, the thermal conductivity increased as the BN concentration was increased. This behavior was also observed when the filler size was increased. Experimentally obtained thermal conductivity values agree with the predicted data from the Maxwell–Eucken model well at less than 70 wt.% BN loading. A larger particle size BN-filled novolac resin exhibits a higher thermal conductivity than a smaller particle size BN-filled one. The combined use of 0.5 and 15 μm particles with a mass ratio of 2:1 achieved the maximum thermal conductivity among the testing systems. The thermal resistance properties of the composites were also studied.
Referência(s)