Artigo Revisado por pares

Doping behaviors of Nb2O5 and Co2O3 in temperature stable BaTiO3-based ceramics

2002; Elsevier BV; Volume: 57; Issue: 1 Linguagem: Inglês

10.1016/s0167-577x(02)00687-0

ISSN

1873-4979

Autores

Wen Li, Jianquan Qi, Yongli Wang, Longtu Li, Zhilun Gui,

Tópico(s)

Dielectric properties of ceramics

Resumo

The influence of Nb2O5 and Co2O3 on the dielectric constant–temperature characteristic of the Sm2O3, CeO2-doped BaTiO3 system was discussed. It can be concluded that Nb5+, Co3+ will be easier to replace the Ti4+ site by using the Nb2O5–Co2O3 composite oxide than by doping Nb2O5, Co2O3 separately. Increasing Co2O3 amount caused a lower dielectric constant and a higher variation rate. A properly sintering temperature can be helpful to flatten the dielectric constant–temperature curve. The BaTiO3-based ceramics doped with the Nb2O5–Co2O3 composition can be sintered at a temperature as low as 1230–1250 °C, and satisfy the X7R required with a high dielectric constant (ε25 °C>4000) and low dielectric loss (tan δ<2.0%).

Referência(s)
Altmetric
PlumX