Characterization of bismuth-manganese oxide catalysts for methane oxidative coupling
1992; Elsevier BV; Volume: 89; Issue: 2 Linguagem: Inglês
10.1016/0926-860x(92)80231-z
ISSN1873-3875
AutoresI. V. Baidikova, H. Matralis, J. Naud, Christina Papadopoulou, E. A. Mamedov, B. Delmon,
Tópico(s)Advancements in Solid Oxide Fuel Cells
ResumoThis paper reports a finding, namely a cooperation between separate phases, which may help understand the mechanism of oxidative coupling of methane. The activity of co-precipitated bismuth-manganese oxides in the oxidative coupling of methane, measured in the continuous flow regime, is maximum for Bi : Mn = 1:2. The catalysts have been investigated by X-ray diffraction. X-ray photoelectron spectroscopy, transmission electron microscopy and microanalysis; catalytic pulse experiments were performed. The Bi2Mn4O10 phase is present in these catalysts. But, surprisingly, although it corresponds to the Bi : Mn ratio of 1:2 giving maximum activity, it decomposes to α-Bi2O3 and α-Mn2O3 in a few hours during the catalytic test. The higher catalytic activity observed at Bi:Mn = 1:2 thus does not seem due to the Bi2Mn4O10 phase. The high activity catalyst is actually composed of Bi2O3 in contact with an other phase. This might be a Bi-depleted Bi2Mn4O10 like phase; it is speculated that this phase could donate oxygen to Bi2O3 and make it more active. This would suggest that oxygen mobility or spill-over between phases, observed to be beneficial in other reactions occurring at 350–450° C, also promotes the selective oxidative coupling of methane above 700° C.
Referência(s)