Portal de Periódicos da CAPES

Determination of the wc ratio of hardened cement paste and concrete samples on thin sections using automated image analysis techniques

1995; Elsevier BV; Volume: 25; Issue: 4 Linguagem: Inglês

10.1016/0008-8846(95)00073-l

1873-3948

Jan Elsen, Nicole Lens, Tine Aarre, D. Quénard, V. Smolej,

Concrete and Cement Materials Research

This article presents results of the wc ratio determination of hardened cement paste and concrete samples on thin sections using automated image analysis techniques. The determination of the wc ratio of hardened concrete is of prime importance for deterioration diagnosis as well as for concrete Quality Assurance in general. An optical method to determine the wc ratio of hardened concrete using thin sections has been developed in Denmark and is now in general use in Denmark and the other Scandinavian countries. Two series of samples prepared in laboratory conditions have been used as ‘reference samples’ to develop and to evaluate procedures for measuring the wc ratio by image analysis techniques: a series of pure cement paste samples and one of concrete samples. Three different image analysis methods have been employed: an interactive, an automatic method with thresholding of grey values by the operator, and a fully automatic method without thresholding. The second method was retained for further measurements. The measurements on the pure cement paste samples confirm the direct relationship between the wc ratio of the samples and the mean grey value measured on thin sections. The results of the measurements of the thin sections prepared out of the reference concrete series also indicate a clear relationship between the wc ratio and the mean grey value but these measurements are less reproducible. The main cause of this variability with the concrete samples is the difficulty in selecting threshold level values.