Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

2007; Elsevier BV; Volume: 45; Issue: 9 Linguagem: Inglês

10.1016/j.optlaseng.2007.02.001

1873-0302

José Roberto Berretta, Wagner de Rossi, Maurício David Martins das Neves, Ivan Alves de Almeida, Nilson Dias Vieira,

Advanced Welding Techniques Analysis

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.