Portal de Periódicos da CAPES

Characterization of Particleboard Aerosol — Size Distribution and Formaldehyde Content

1986; Taylor & Francis; Volume: 47; Issue: 12 Linguagem: Inglês

10.1080/15298668691390575

2163-369X

JEFFREY M. STUMPF, Kenneth D. Blehm, Roy M. Buchan, B.J. Gunter,

Occupational exposure and asthma

Health hazards unique to particleboard include the generation of urea-formaldehyde resin bound in wood aerosol and release of formaldehyde gas that can be inhaled by the worker. A particleboard aerosol was generated by a sanding process and collected under laboratory conditions that determined the particle size distribution and formaldehyde content. Three side-by-side Marple 296 personal cascade impactors with midget impingers attached downstream collected particleboard aerosol and gaseous formaldehyde for ten sample runs. Gravimetric analysis quantified the collected aerosol mass, and chromotropic acid/spectrophotometric analytical methods were employed for formaldehyde content in particleboard aerosol and gaseous formaldehyde liberated from sanded particleboard. Significant variations (p<.005) were observed for the particleboard mass and gaseous formaldehyde collected between sample runs. No significant differences (α=.05) were observed for the aerosol size distribution determined and formaldehyde content in particleboard aerosol per unit mass for sampling trials. The overall MMAD of particleboard aerosol was 8.26 µm AED with a σg of 2.01. A predictive model was derived for determining the expected formaldehyde content (µg) by particleboard aerosol mass (mg) collected and particulate size (µmAED).