Micro-fuel cell power sources
2007; Wiley; Volume: 31; Issue: 6-7 Linguagem: Inglês
10.1002/er.1281
ISSN1099-114X
Autores Tópico(s)Advancements in Solid Oxide Fuel Cells
ResumoInternational Journal of Energy ResearchVolume 31, Issue 6-7 p. 576-602 Research Article Micro-fuel cell power sources Jeffrey D. Morse, Corresponding Author Jeffrey D. Morse [email protected] Center for Meso, Micro, and Nano Technology, Lawrence Livermore National Laboratory, 7000 East Avenue, L-222, Livermore, CA 94550, U.S.A.Center for Meso, Micro, and Nano Technology, Lawrence Livermore National Laboratory, 7000 East Avenue, L-222, Livermore, CA 94550, U.S.A.Search for more papers by this author Jeffrey D. Morse, Corresponding Author Jeffrey D. Morse [email protected] Center for Meso, Micro, and Nano Technology, Lawrence Livermore National Laboratory, 7000 East Avenue, L-222, Livermore, CA 94550, U.S.A.Center for Meso, Micro, and Nano Technology, Lawrence Livermore National Laboratory, 7000 East Avenue, L-222, Livermore, CA 94550, U.S.A.Search for more papers by this author First published: 19 January 2007 https://doi.org/10.1002/er.1281Citations: 146AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Abstract This paper presents a review and discussion of micro-fuel cell technologies, providing insight into the innovations that have been made to date. Discussion of concepts and results leading towards increased levels of integration and performance for micro-fuel cell systems will elucidate the potential of thin film and microfabrication methods in meeting the challenges and requirements necessary for consumer applications. While the amount of literature in this area is substantial, a representative sampling of key developments will be presented in this paper, in order to gain a sense of the design methodologies being implemented for micro-fuel cell power sources. Copyright © 2007 John Wiley & Sons, Ltd. REFERENCES Alper J. 2002. The battery: not yet a terminal case. Science 296: 1224– 1226. Arana L, Schaevitz S, Franz A, Schmidt M, Jensen K. 2003. A microfabricated suspended-tube chemical reactor for thermally efficient fuel processing. Journal of Microelectromechanical Systems 12(5): 600– 612. Balcom J. 2006. A unique perspective on portable fuel cell membrane design. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Boysen D, Chisholm C, Haile S, Narayanan S. 2000. Polymer solid acid composite membranes for fuel-cell applications. Journal of the Electrochemical Society 147(10): 3610– 3613. Cha S, O'Hayre R, Lee S, Saito Y, Prinz F. 2004a. Geometric scale effect of flow channels on performance of fuel cells. Journal of the Electrochemical Society 151(11): A1856– A1864. Cha S, O'Hayre R, Prinz F. 2004b. The influence of size scale on the performance of fuel cells. Solid State Ionics 175: 789– 795. Chan H, Nguyen N, Xia Z, Wu Z. 2005. Development of a polymeric micro fuel cell containing laser-micromachined flow channels. Journal of the Micromechanics and Microengineering 15: 231– 236. Chang H, Song I, Seung D. 2006. DMFC for note PC and mobile phone: from materials to system. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Choban E, Markoski L, Wieckowski A, Kenis P. 2004. Microfluidic fuel cell based on laminar flow. Journal of Power Sources 128: 54– 60. Choban E, Waszczuk P, Kenis P. 2005. Characterization of limiting factors in laminar flow-based membraneless microfuel cells. Electrochemical and Solid State Letters 8(7): A348– A352. Dunn-Rankin D, Leal E, Walther D. 2005. Personal power systems. Progress in Energy and Combustion Science 31: 422– 465. Dyer C. 2002. Fuel cells for portable applications. Journal of Power Sources 106: 31– 34. Gaillard F, Laurent J, Giacometti N, Lambert K, Nayoze C, Valon B, Marsacq D. 2005. Micro-fuel cell: new technology for mobile energy. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Gennett T. 2003. Fuel cell applications of single wall carbon nanotubes. 5th Annual International Symposium Small Fuel Cells 2003; Small Fuel Cells for Portable Applications. The Knowledge Foundation: New Orleans, LA. Gold S, Chu K, Lu C, Shannon M, Masel R. 2004. Acid loaded porous silicon as a proton exchange membrane for micro-fuel cells. Journal of Power Sources 135: 198– 203. Gottesfeld S. 2002. Development and demonstration of fuel cells in the 1 to 10 W power range for consumer electronics applications. Fuel Cell Magazine December: 22– 23. Gottesfeld S. 2005. First DMFC power source integrated in a handheld electronic device. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Gottesfeld S, Wilson M. 2000. Polymer electrolyte fuel cells as potential power sources for portable electronic devices. In Energy Storage Systems for Electronics, T Osaka, M Dutta (eds). Gordon and Breach: New York, NY; 487– 492. Goto Y. 2005. Toshiba DMFC for portable applications. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Ha S, Adams B, Masel R. 2004. A miniature air breathing direct formic acid fuel cell. Journal of Power Sources 128: 119– 124. Hahn R, Wagner S, Schmitz A, Reichl H. 2004. Development of planar micro fuel cell with thin film and micro patterning technologies. Journal of Power Sources 131: 73– 78. Hallmark J. 2005. 20 W reformed methanol fuel cell system. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Hayase M, Kawase T, Hatsuzawa T. 2004. Miniature 250 µm thick fuel cell with monolithically fabricated silicon electrodes. Electrochemical and Solid State Letters 7(8): A231– A234. Heinzel A, Hebling C, Muller M, Zedda M, Muller C. 2002. Fuel cells for low power applications. Journal of Power Sources 105: 250– 255. Hirano S, Kim J, Srinivasan S. 1997. Solid oxide fuel cells. Electrochimica Acta 42: 1587– 1591. Holladay J, Jones E, Phelps M, Hu J. 2002. Microfuel processor for use in a miniature power supply. Journal of Power Sources 108: 21– 27. Homa A. 2005. Alternative approaches for DMFC design: silicon-based systems. 7th Annual International Symposium Small Fuel Cells 2006. The Knowledge Foundation: Washington, DC. Homa A. 2006. Latest developments and performance of silicon based DMFCs. 8th Annual International Symposium Small Fuel Cells 2006. The Knowledge Foundation: Washington, DC. Ilic D, Holl K, Wohrle T, Birke-Salam F, Perner A, Haug P. 2006. Fuel cells and batteries: competition or separate paths? Journal of Power Sources 155: 72– 76. Iqbal Z. 2000. Application of carbon nanotubes in PEM (proton exchange membrane) fuel cells. Proceedings of the 2nd Annual Advances in R&D for the Commercialization of Small Fuel Cells and Battery Technologies for Use in Portable Power Applications. The Knowledge Foundation: New Orleans, LA, 149– 161. Jankowski A, Morse J, Hayes J, Graff R. 2002. Microfabricated thin film fuel cell for portable power requirements. Proceedings of the Materials Research Society Symposium 730: 93– 98. Jayashree R, Gancs L, Choban E, Primak A, Natarajan D, Markoski L, Kenis P. 2005a. Air-breathing laminar flow-based microfluidic fuel cell. Journal of the American Chemical Society 127: 16758– 16759. Jayashree R, Spendelow J, Yeom J, Rastogi C, Shannon M, Kenis P. 2005b. Characterization and application of electrodeposited Pt, Pt/Pd, and Pd catalyst structures for direct formic acid micro fuel cells. Electrochimica Acta 50: 4674– 4682. Kelley S, Deluga G, Smyrl W. 2000. A miniature methanol/air polymer electrolyte fuel cell. Electrochemical and Solid State Letters 3(9): 407– 409. Kelley S, Deluga G, Smyrl W. 2002. Miniature fuel cells fabricated on silicon substrates. AIChE Journal 48(5): 1071– 1082. Lee S, Chang-Chien A, Cha S, O'Hayre R, Park Y, Saito Y, Prinz F. 2002. Design and fabrication of a micro fuel cell array with 'flip-flop' interconnection. Journal of Power Sources 112: 410– 418. Lee S, Chen Y, Huang C. 2005. Electroforming of metallic bipolar plates with micro-featured flow field. Journal of Power Sources 145: 369– 375. D Linden, T Reddy (eds). 2001. Handbook of Batteries ( 3rd edn). McGraw-Hill: New York, NY. Lu G, Wang C. 2004. Electrochemical and flow characterization of a direct methanol fuel cell. Journal of Power Sources 134: 33– 40. Lu G, Wang C, Yen T, Zhang X. 2004. Development and characterization of a silicon-based micro direct methanol fuel cell. Electrochima Acta 49: 821– 828. Madou M. 2002. Fundamentals of Microfabrication: The Science of Miniaturization. CRC Press: New York. Markoski L. 2006. The laminar flow fuel cell: a portable power solution. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Martin J. 2004. A 75W portable SOFC generator, technical proceedings 2004. Fuel Cell Seminar, San Antonio, TX. Martin J. 2005. Portable solid oxide fuel cell power supplies. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Maynard H, Meyers J. 2002. Miniature fuel cells for portable power: design considerations and challenges. Journal of Vacuum Science Technology B 20(4): 1287– 1297. Mench M, Wang C. 2003. An in-situ method for determination of current distribution in PEM fuel cells applied to a direct methanol fuel cell. Journal of the Electrochemical Society 150(1): A79– A85. Meyers J, Maynard H. 2002. Design considerations for miniaturized PEM fuel cells. Journal of Power Sources 109: 76– 88. Miley G, Luo N, Mather J, Byrd E, Burton R, Hawkins G, Gimlin R, Kopec G, Shrestha P, Benavides G, Laystrom J, Rusek J, Valdez T, Narayanan S. 2006. Compact high-power-density direct NaBH4/H2O2 fuel cells. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Min K, Tanaka S, Esashi M. 2006. Fabrication of novel MEMS-based polymer electrolyte fuel cell architectures with catalytic electrodes supported on porous SiO2. Journal of Micromechanics and Microengineering 16: 505– 511. Modroukas D, Modi V, Frechette L. 2005. Micromachined silicon structures for free-convection PEM fuel cells. Journal of Micromechanics and Microengineering 15: S193– S201. Mohring R. 2006. Hydrogen battery technology for portable applications. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Morse J, Jankowski A, Graff R, Hayes J. 2000. Novel proton exchange membrane thin-film fuel cell for microscale energy conversion. Journal of Vaucum Science Technology 18(4): 2003– 2005. Motokawa S, Mohamedi M, Momma T, Shoji S, Osaka T. 2004. MEMS-based design and fabrication of a new concept micro direct methanol fuel cell (µ-DMFC). Electrochemistry Communications 6: 562– 566. Murray E, Tsai T, Barnett S. 1999. A direct methane fuel cell with a ceria-based anode. Nature 400: 649– 651. Narayanan S, Valdez T. 2001. Analysis of voltage transients in methanol fuel cells. Proceedings of the International Symposium on Direct Methanol Fuel Cells, vol. 4. Electrochemical Society Proceedings: Pennington, NJ, 164– 173. Narayanan S, Valdez T, Clara F. 2001. Development of miniature fuel cell for portable applications. Proceedings of the International Symposium on Direct Methanol Fuel Cells, vol. 4. Electrochemical Society Proceedings: Pennington, NJ, 254– 264. Nguyen N, Chan S. 2006. Micromachined polymer electrolyte membrane and direct methanol fuel cells—a review. Journal of Micromechanics and Microengineering 16: A1– A12. Nowak R. 2001. A DARPA perspective on small fuel cells for the military. Solid State Energy Conversion Alliance (SECA) Workshop, Arlington, VA. O'Hayre R, Braithwaite D, Hermann W, Lee S, Fabian T, Cha S, Saito Y, Prinz F. 2003. Development of portable fuel cell arrays with printed-circuit technology. Journal of Power Sources 124: 459– 472. O'Hayre R, Barnett D, Prinz F. 2005. The triple phase boundary: a mathematical model and experimental investigations for fuel cells. Journal of the Electrochemical Society 152(2): A439– A444. Osenar P. 2006. Advancement in sodium borohydride fueling subsystems for portable applications. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Park S, Vohs J, Gorte R. 2000. Direct oxidation of hydrocarbons in a solid oxide fuel cell. Nature 404: 265– 267. Park H, Malen J, Piggott W, Morse J, Havstad M, Grigoropoulos C, Greif R, Sopchak D, Upadhye R. 2006. Methanol steam reformer on a silicon wafer. Journal of Microelectromechanical Systems. Pavio J. 2002. Microfuel cells for portable electronics. Small Fuel Cells for Portable Applications ( 3rd edn). Knowledge Press, Inc.: Brookline, MA, 49– 59. Peppley B, Amphlett J, Kearns L, Mann R. 1999. Methanol-steam reforming on Cu/ZnO/Al2O3. Part 1: The reaction network. Applied Catalysis A: General 179: 21– 29. Pichonat T, Gauthier-Manuel B. 2005. Realization of porous silicon-based miniature fuel cells. Journal of Power Sources 154: 198– 201. Pichonat T, Gauthier-Manuel B. 2006. Development of porous silicon-based miniature fuel cells. Journal of Micromechanics and Microengineering 15: S179– S184. Pivovar B, Hickner M, Zawodzinski T, Ren X, Gottesfeld S. 2001. Systems issues for Nafion-based portable direct methanol fuel cells. Proceedings of the International Symposium on Direct Methanol Fuel Cells, vol. 4. Electrochemical Society Proceedings: Pennington, NJ, 221– 230. Reichmuth D, Chirica G, Kirby B. 2003. Increasing the performance of high-pressure, high-efficiency electrokinetic micropumps using zwitterionic solute additives. Sensors and Actuators B 92: 37– 43. Ren X, Springer T, Gottesfeld S. 2000a. Water and methanol uptakes in Nafion membranes and membrane effects on direct methanol fuel cell performance. Journal of the Electrochemical Society 147(1): 92– 98. Ren X, Zelenay P, Thomas S, Davey J, Gottesfeld S. 2000b. Recent advances in direct methanol fuel cells at Los Alamos National Laboratory. Journal of Power Sources 86: 111– 116. Rhee Y, Ha S, Masel R. 2003. Crossover of formic acid through Nafion membranes. Journal of Power Sources 117: 35– 38. Rice C, Ha S, Masel R, Waszczuk P, Wieckowski A, Barnard T. 2002. Direct formic acid fuel cells. Journal of Power Sources 111: 82– 89. Shah K, Shin W, Besser R. 2003. Novel microfabrication approaches for directly patterning PEM fuel cell membranes. Journal of Power Sources 123: 172– 181. Shah K, Shin W, Besser R. 2004. A PDMS micro proton exchange membrane fuel cell by conventional and non-conventional microfabrication techniques. Sensors and Actuators B 97: 157– 167. Shao Z, Haile S, Ahn J, Ronney P, Zhan Z, Barnett S. 2005. A thermally-sustained micro solid-oxide fuel-cell stack with high power density. Nature 435: 795– 798. Sparks D, Chimbayo A, Bihary D, Goetzinger D, Najafi N, Kawaguchi K, Yasuda M. 2006. Methanol concentration sensors for DMFCs. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Stanley K. 2005. Cathode effects for micro fuel cells. 7th Annual International Symposium Small Fuel Cells 2005; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Stanley K, Czyzewska E, Vanderhoek T, Fan L, Abel K, Wu Q, Parameswaran M. 2005. A hybrid sequential deposition fabrication technique for micro fuel cells. Journal of Micromechanics and Microengineering 15: 1979– 1987. Tang Y, Stanley K, Wu J, Ghosh D, Zhang J. 2005. Design considerations of micro thin film solid oxide fuel cells. Journal of Micromechanics and Microengineering 15: S185– S192. Thomas S, Ren X, Gottesfeld S, Zelenay P. 2002. Direct methanol fuel cells: progress in cell performance and cathode research. Electrochimica Acta 47: 3741– 3748. Tsou Y. 2006. Catalysts and GDE/MEA advancement for performance and cost-effectiveness. 8th Annual International Symposium Small Fuel Cells 2006; Small Fuel Cells for Portable Applications. The Knowledge Foundation: Washington, DC. Valdez T, Narayanan S, Lewis C, Chun W. 2001. Hydrogen peroxide oxidant fuel cell systems for ultraportable applications. Proceedings of the International Symposium on Direct Methanol Fuel Cells, vol. 4. Electrochemical Society Proceedings: Pennington, NJ, 265– 273. Wainright J, Savinell R, Liu C, Litt M. 2003. Microfabricated fuel cells. Electrochimica Acta 48: 2869– 2877. Witham C, Chun W, Valdez T, Narayanan S. 2000. Performance of direct methanol fuel cells with sputter-deposited anode catalyst layers. Electrochemical and Solid State letters 3(11): 497– 500. Wosniak K, Johansson D, Bring M, Sanz-Velasco A, Enoksson P. 2004. A micro direct methanol fuel cell demonstrator. J. Micromech MicroEng 14: S59– S63. Xie C, Bostaph J, Pavio J. 2004. Development of a 2 W direct methanol fuel cell power source. Journal of Power Sources 136: 55– 65. Yen T, Fang N, Zhang X. 2003. A micro methanol fuel cell operating at near room temperature. Applied Physics Letters 83(19): 4056– 4058. Yeom J, Mozsgai G, Flachsbart B, Choban E, Asthana A, Shannon M, Kenis P. 2005. Microfabrication and characterization of a silicon-based millimeter scale, PEM fuel cell operating with hydrogen, methanol, or formic acid. Sensors and Actuators B 107: 882– 891. Yu J, Cheng P, Ma Z, Yi B. 2003. Fabrication of miniature silicon wafer fuel cells with improved performance. Journal of Power Sources 124: 40– 46. Zhu Y, Ha S, Masel R. 2004. High power density direct formic acid fuel cells. Journal of Power Sources 130: 8– 14. Citing Literature Volume31, Issue6-7Special Issue: Recent Advances in Micro and Nano Energy SystemsMay 2007Pages 576-602 ReferencesRelatedInformation
Referência(s)