Portal de Periódicos da CAPES

Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process

2008; Elsevier BV; Volume: 43; Issue: 4 Linguagem: Inglês

10.1016/j.commatsci.2008.03.010

1879-0801

Y.C. Lin, Ming-Song Chen, Jue Zhong,

Microstructure and mechanical properties

Based on experimental results, the dynamic recrystallization mathematical models of 42CrMo steel were derived. The effects of strain rates on the strain/stress distribution and microstructural evolution in 42CrMo steel during hot upsetting process were simulated by integrating the thermo-mechanical coupled finite element model. The results show that the deformation of the specimen is inhomogeneous, and the degree of the deformation inhomogeneity decreases with the increase of strain rates. The distribution of the effective stress in the specimen is also inhomogeneous, and the locus of the maximum effective stress changes with the variations of strain rates. The dynamic recrystallization volume fraction decreases with the increase of strain rates. The distribution of the dynamic recrystallization grain is inhomogeneous in the deformed specimen, and the average dynamic recrystallization grain size decreases as the strain rate is increased. A good agreement between the predicted and experimental results confirmed that the derived dynamic recrystallization mathematical models can be successfully incorporated into the finite element model to predict the microstructural evolution in the hot upsetting process for 42CrMo steel.