Portal de Periódicos da CAPES

Pentode Ignitrons for Electronic Power Converters

1944; Institute of Electrical and Electronics Engineers; Volume: 63; Issue: 10 Linguagem: Inglês

10.1109/t-aiee.1944.5058774

2330-9431

Helfried Steiner, J. L. Zehner, H. E. Zuvers,

High voltage insulation and dielectric phenomena

The name ``pentode ignitron'' has been applied to a high-voltage tube used for rectification and inversion in electronic converters. It is a sealed steel tube having an anode, three grids, and a mercury-pool cathode. The tube is of the gas-filled type with control characteristics similar to those of the thyratron. An ignitor establishes a cathode spot each cycle on the mercury pool. The cathode spot is stabilized at low anode currents by the use of an auxiliary holding anode. The functions of the three grids are somewhat similar to those in the pentode vacuum tube, but the manner of use is quite different. The first grid, or one nearest the anode, is used as an intermediate anode to divide potential gradients across the tube during nonconducting periods. The second, or center grid, is used to control the starting of the conduction period and the third, or outer grid, as a shield to permit rapid deionization of the space between the control and shield grids. The introduction of multiple grids in ignitron tubes provides certain characteristics which are essential to inverter operation. It is the purpose of this paper to describe some of these characteristics, and the design and construction of the pentode ignitron tube. These tubes are the ones installed in the power converter described in the companion papers. 1,6-8