Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Determination of Ca, Mg, Sr and Ba in crude oil samples by atomic absorption spectrometry

2012; Royal Society of Chemistry; Volume: 27; Issue: 9 Linguagem: Inglês

10.1039/c2ja30125c

1364-5544

Helen Moura Pessoa, Rachel Ann Hauser‐Davis, Reinaldo Campos‐Vargas, Eustáquio Vinícius Ribeiro de Castro, Maria Tereza Weitzel Dias Carneiro, Geisamanda Pedrini Brandão,

Scientific Measurement and Uncertainty Evaluation

The presence of Ca, Mg, Sr and Ba in crude oil samples should be controlled, since they can lead to incrustations on steel pipes, valves, pumps and other equipment used in crude oil drilling. This paper proposes procedures for the determination of these metals in crude oil by atomic absorption spectrometry, using the formation of O/W emulsions for sample preparation. Emulsions were prepared in 0.2% v/v HNO3 using Triton X-100 as a surfactant and showed good stability for the four studied analytes of at least 5 days after preparation. Flame atomic absorption spectrometry (FAAS) was used for the determination of Ca, Mg and Sr and graphite furnace atomic absorption spectrometry (GFAAS) was used for the determination of Ba. External calibration could be performed for the determination of Ca, Mg and Sr with inorganic standard solutions in the form of emulsions; for Ba, calibration was possible in aqueous medium. The limits of detection obtained were 0.54, 0.09, 0.10 and 0.04 μg g−1 for Ca, Mg, Sr and Ba respectively in the crude oil samples. Recoveries ranging from 96 to 104% and the good agreement among the found and certified values in the analysis of a certified reference material (NIST 1085b) warranted the accuracy of the procedures.