Portal de Periódicos da CAPES

Chilled ammonia process for CO2 capture

2009; Elsevier BV; Volume: 4; Issue: 2 Linguagem: Inglês

10.1016/j.ijggc.2009.10.005

1750-5836

Victor Darde, Kaj Thomsen, Willy J. M. van Well, Erling H. Stenby,

Ammonia Synthesis and Nitrogen Reduction

The chilled ammonia process absorbs the CO2 at low temperature (2–10 °C). The heat of absorption of carbon dioxide by ammonia is significantly lower than for amines. In addition, degradation problems can be avoided and a high carbon dioxide capacity is achieved. Hence, this process shows good perspectives for decreasing the heat requirement. However, a scientific understanding of the processes is required. The thermodynamic properties of the NH3–CO2–H2O system were described using the extended UNIQUAC electrolyte model developed by Thomsen and Rasmussen in a temperature range from 0 to 110 °C and pressure up to 100 bars. The results show that solid phases consisting of ammonium carbonate and bicarbonate are formed in the absorber. The heat requirements in the absorber and in the desorber have been studied. The enthalpy calculations show that a heat requirement for the desorber lower than 2 GJ/ton CO2 can be reached.