Portal de Periódicos da CAPES

A Die Pressing Test for the Estimation of Agglomerate Strength

1994; Wiley; Volume: 77; Issue: 3 Linguagem: Inglês

10.1111/j.1151-2916.1994.tb05369.x

1551-2916

Jinhua Song, Julian Evans,

Powder Metallurgy Techniques and Materials

A die pressing test was developed for quick and inexpensive estimation of the agglomerate strength of ceramic powders. The critical nominal pressure ( p c ) at which contact areas between agglomerates start to increase rapidly was found from the relationship between change in sample height and applied pressure in uniaxial single‐ended die pressing. A quantitative microscopic method was used for measuring the area fraction (Ψ) of agglomerates which transmits the force through the assembly. A die pressing agglomerate strength, σ d , is defined as σ d = 0.7 p c /Ψ. This strength was compared with the agglomerate tensile strength obtained from single agglomerate diametral compression tests and found to be 50% higher than the latter because of multipoint loading. A suggested guideline is that the mean agglomerate tensile strength is approximately 52% of p c determined in a die pressing test for spherical agglomerates. In addition to agglomerate tensile strength, the mean agglomerate size, the interior macropore structure of agglomerates, as well as the packing efficiencies between and inside agglomerates can be estimated by the procedure.