Portal de Periódicos da CAPES

Analytical and Experimental Study of the Vibration of Bonded Beams With a Lap Joint

1990; American Society of Mechanical Engineers; Volume: 112; Issue: 4 Linguagem: Inglês

10.1115/1.2930127

1528-8927

Mohan D. Rao, Malcolm J. Crocker,

Structural Behavior of Reinforced Concrete

A theoretical model to study the flexural vibration of a bonded lap joint system is described in this paper. First, equations of motion at the joint region are derived using a differential element approach. The transverse displacements of the upper and lower beam are considered to be different. The adhesive is assumed to be linearly viscoelastic and the widely used Kelvin-Voight model is used to represent the viscoelastic behavior of the adhesive. The shear force at the interface between the adhesive and the beam is obtained from the simple bending motion equations of the two beams. The resulting equations of motion are combined with the equations of transverse vibration of the beams in the unjointed regions. These are later solved as a boundary value problem to obtain the eigenvalues and eigenvectors of the system. The model can be used to predict the natural frequencies, modal damping ratios, and mode shapes of the system for free vibration. Good agreement between numerical and experimental results was obtained for a system of graphite epoxy beams lap-jointed by an epoxy adhesive.