Analysis of Bio-Oil, Biogas, and Biochar from Pressurized Pyrolysis of Wheat Straw Using a Tubular Reactor
2009; American Chemical Society; Volume: 23; Issue: 5 Linguagem: Inglês
10.1021/ef8010959
ISSN1520-5029
AutoresNader Mahinpey, Pulikesi Murugan, Thilakavathi Mani, Renata Raina,
Tópico(s)Biofuel production and bioconversion
ResumoThe main objective of this work was to examine the influence of pyrolysis pressure on product yield from wheat straw pyrolysis. The experiments were performed in a tubular reactor at different pressures (10, 20, 30, and 40 psi) with a constant flow rate of nitrogen (50 cc/min) at a temperature of 500 °C. During pyrolysis, the products obtained are oil, gas, and char. The maximum oil yield was 37.6%, obtained at high pressure (40 psi). Liquid product was analyzed using gas chromatography/mass spectrometry (GC−MS). The percentage of bio-oil compounds increased as operating pressure increased. The major components present in the bio-oil were phenols, methoxyphenols, and substituted methoxyphenols such as eugenol and vanillin. The gas products were mainly CO, H2, CO2, CH4, C2H4, C2H6, C4H10, and C3's. Char characteristics were measured using scanning electron microscopy (SEM) and ultimate analysis. Van Krevelen diagram shows that the chars obtained from wheat straw pyrolysis have very less H: C and O: C ratios than the raw wheat straw. On the basis of the results of this study, it may be concluded that, within the pressure range studied, 20 psi is the optimum pressure for the pyrolysis of the wheat straw in a tubular reactor with respect to products (char, bio-oil, and gas) yield.
Referência(s)