Effects of Plasma Activation on Hydrophilic Bonding of Si and SiO[sub 2]
2002; Institute of Physics; Volume: 149; Issue: 6 Linguagem: Inglês
10.1149/1.1477209
ISSN1945-7111
AutoresTommi Suni, Kimmo Henttinen, I. Suni, Jari Mäkinen,
Tópico(s)Electronic Packaging and Soldering Technologies
ResumoLow-temperature bonding of Si wafers has been studied utilizing reactive ion etching-mode plasma activation. The hydrophilic Si and thermally oxidized Si wafers were exposed to Ar, or plasma prior to bonding in air or vacuum. After plasma treatment the wafers were cleaned in RCA-1 solution and/or deionized water. Strong bonding was achieved at 200°C with all the investigated plasma gases, if proper bonding and cleaning procedures were used. Extended RCA-1 cleaning deteriorated the bond strength, but a short cleaning improved bonding. We found that the activation of the thermal oxide has a larger influence on the bond strength than the activation of the native oxide surface in Si/oxide wafer pairs. We suggest that the plasma treatment induces a highly disordered surface structure, which enhances the diffusion of the water from the bonded interface. As a result of the plasma exposure the number of the surface OH groups is greatly increased enabling strong bonding at a low temperature. © 2002 The Electrochemical Society. All rights reserved.
Referência(s)