Artigo Revisado por pares

Direct Measurement of Concentration Distribution within the Boundary Layer of an Ion-Exchange Membrane

2002; Elsevier BV; Volume: 251; Issue: 2 Linguagem: Inglês

10.1006/jcis.2002.8407

ISSN

1095-7103

Autores

Jae‐Hwan Choi, Jin‐Soo Park, Seung‐Hyeon Moon,

Tópico(s)

Membrane-based Ion Separation Techniques

Resumo

In this study the concentration distributions within the diffusion boundary layer were obtained by directly measuring the potential drops while the currents (under- and overlimiting) passed through the Neosepta CMX cation-exchange membrane (Tokuyama Corp., Japan). Potential drops according to the distance from the membrane surface on the depleted side were measured using a microelectrode to obtain the concentration profile. From the concentration profiles obtained, it was observed that the diffusion boundary layers existed in the range of 300-350 microm, which reasonably coincide with the theoretical diffusion boundary layer thickness calculated from the limiting current density. Although there were some deviations between the concentrations determined from the Nernst model and those from experiments, it was confirmed that the Nernst model effectively depicts the transport phenomena in the ion-exchange membrane system. In addition it was found that the salt concentration at the membrane surface increased when the currents applied exceeded the limiting current. It is thought that the concentration polarization formed in the diffusion boundary layer at currents near or lower than the limiting current was disturbed by a turbulent convection when the current was greater than the limiting current. As a consequence, the concentration at the membrane surface increased to a sufficient level for generation of the overlimiting current.

Referência(s)