Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Determination Of Formaldehyde And Acetaldehyde Associated To Atmospheric Aerosols By HPLC

1993; Taylor & Francis; Volume: 52; Issue: 1-4 Linguagem: Inglês

10.1080/03067319308042847

1029-0397

Jaílson B. de Andrade, H. L. C. Pinheiro, Marta V. Andrade,

Odor and Emission Control Technologies

Abstract A rapid new analytical protocol was developed for the determination of formaldehyde and acetaldehyde associated to atmospheric particulate matter, at ng/m3 levels. The aerosols were collected on glass fiber filters (8″×10″) at face velocities ranging from 15 m/min to 23 m/min. Aliquots of 15.4 cm2 were sonicated, for 20 min, with 5.0 mL of 0,01% 2,4-dinitrophenylhydrazine (DNPH), 1 % phosphoric acid. The liquid phase was then filtered and the separation and quantification of the corresponding 2,4-dinitrophenylhidrazone (DNPHo) derivatives carried out by reverse phase HPLC. Acetonitrile:water (57:43, v/v) as mobile phase at 1.0 mL/min and absorbance detection at 350 nm and 365 nm for, respectively, formaldehyde-DNPHo (0.04 AUFS) and acetaldehyde-DNPHo (0.01 AUFS) were used. The precision for four different aliquots, from a 8″×10″ glass fiber filter, were under 0.04% for formaldehyde and 14.16 % for acetaldehyde. In Salvador, Bahia, Brazil, formaldehyde and acetaldehyde were determined, respectively, in the range of 6.8 ng/m3 to 27.3 ng/m3 and 9.1 ng/m3 to 54.6 ng/m3. Key Words: Atmospheric aerosolsformaldehydeacetaldehydecarbonyl compoundsHPLC.