Portal de Periódicos da CAPES

Artigo Acesso aberto Produção Nacional Revisado por pares

BIBTEX RIS

Produção de painéis aglomerados da madeira de desrama de Acacia mangium

2013; Embrapa Forestry; Volume: 33; Issue: 76 Linguagem: Inglês

10.4336/2013.pfb.33.76.434

1984-8986

José Benedito Guimarães Júnior, Bruna Layara Messias Araújo, Olívia Pereira Lopes, Rafael Farinassi Mendes, Lourival Marin Mendes,

Wood Treatment and Properties

The objective of this study was to assess the quality of particleboard of Acacia mangium Willd pruning wood, in comparison with Pinus oocarpa and Eucalyptus grandis panels. The wood of A. mangium . was obtained in the southern region of . Piaui State, and the wood samples of P. oocarpa and E. grandis were obtained in Lavras, State of Minas Gerais. To produce the panels, it was used 8% of urea-formaldehyde adhesive and 1% of paraffin. The panels were pressed at 160 °C, pressure of 3.92 Mpa for 8 min. Considering the physical properties, the panels of wood pruning from A. mangium and from P. oocarpa showed the best results, especially from A. mangium that presented values of thickness swelling below those required by the standard CS 236-66. According to the same standard, only E. grandis panels showed results above requirements to the modulus of elasticity and all materials presented performance above the reference normalized for the modulus of rupture. To traction strain the panels produced with pruning wood of A. mangium and E. grandis , with higher values for this mechanical property.