Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

The use of a W-Rh permanent modifier for direct determination of bismuth in urine and whole blood by electrothermal atomic absorption spectrometry

2001; Royal Society of Chemistry; Volume: 16; Issue: 8 Linguagem: Inglês

10.1039/b103161a

1364-5544

Fernando Barbosa, Éder C. Lima, Renato A. Zanão, Francisco José Krug,

Radioactive element chemistry and processing

The direct determination of bismuth in urine and whole blood samples is proposed by graphite furnace atomic absorption spectrometry. The pyrolytic integrated platform of the THGA tube was coated with 250 µg W + 200 µg Rh to increase the tube lifetime. Urine samples were diluted (1 + 1 v/v) and blood samples (1 + 4 v/v) in a solution containing 1.0% v/v HNO3 + 0.2% Triton X-100, and 20 µl of the resulting dilute samples were delivered into the W-Rh modified platform together with 10 µl of 10 mg l−1 Rh solution. After 350 firings a new coating was made. The combined use of Rh solution with the W-Rh coating was decisive for increasing the maximum pyrolysis temperature of blood and urine bismuth up to 1100 °C. With this approach the tube lifetime increased by 80% and re-calibrations were minimised when compared to a Pd + Mg conventional modifier. The detection limits (n = 20) were 3.3 µg l−1 and 8.4 µg l−1 for urine and whole blood, respectively, and the characteristic mass was 49.0 pg using standard THGA. The accuracy of the proposed method was verified by comparing the results with the decomposed sample solutions. No statistical differences were found by the paired t-test at the 99% confidence level.