CVD nanocrystalline diamond coatings on Ti alloy: A synchrotron-assisted interfacial investigation
2012; Elsevier BV; Volume: 134; Issue: 1 Linguagem: Inglês
10.1016/j.matchemphys.2012.02.043
ISSN1879-3312
AutoresY. S. Li, C. Z. Zhang, Haitao Ma, Lizhong Yang, Lei Zhang, Yongbing Tang, X. J. Li, L.L. He, Renfei Feng, Q. Yang, Akira Hirose,
Tópico(s)Advanced materials and composites
ResumoDiamond coating on Ti-6Al-4V alloy was carried out using microwave plasma enhanced CVD with a super high CH4 concentration, and at a moderate deposition temperature close to 500 °C. The nucleation, growth, adhesion behaviors of the diamond coating and the interfacial structures were investigated using Raman, XRD, SEM/TEM, synchrotron radiation and indentation test. Nanocrystalline diamond coatings have been produced and the nucleation density, nucleation rate and adhesion strength of diamond coatings on Ti alloy substrate are significantly enhanced. An intermediate layer of TiC is formed between the diamond coating and the alloy substrate, while diamond coating debonding occurs both at the diamond-TiC interface and TiC-substrate interface. The simultaneous hydrogenation and carburization also cause complex micro-structural and microhardness changes on the alloy substrates. The low deposition temperature and extremely high methane concentration demonstrate beneficial to enhance coating adhesion strength and reduce substrate damage.
Referência(s)