Portal de Periódicos da CAPES

High temperature and pressure alkaline electrolysis

2009; Elsevier BV; Volume: 34; Issue: 9 Linguagem: Inglês

10.1016/j.ijhydene.2009.02.083

1879-3487

Jason Ganley,

Fuel Cells and Related Materials

This paper describes experimental work involving the direct-current electrolysis of highly concentrated potassium hydroxide solutions at high temperatures (up to 400 °C) and under various pressures. A high-temperature alkaline electrolysis cell resistant to chemical attack from the highly corrosive electrolyte solution and capable of high-pressure operation was designed and tested. The cell was constructed with a Monel® alloy housing and cathode, while various anode materials were compared. The anode materials tested included nickel, Monel alloy, lithiated nickel, and cobalt-plated nickel. The advantages of operating an alkaline electrolysis cell at high temperatures include increasing the ionic conductivity of the electrolyte and enhancing the rates of electrochemical reactions at the electrode surfaces. Cell operation with increasing steam partial pressure over the solution is also shown to enhance cell performance. The prudent selection of anode material also impacts the required terminal potential for a given current density, and consequently the cell's electric power efficiency. The best cell performance was achieved using a cobalt-plated nickel anode at a temperature of 400 °C and a steam partial pressure of 8.7 MPa.