Diffusion dialysis membranes with semi-interpenetrating network for acid recovery
2015; Elsevier BV; Volume: 493; Linguagem: Inglês
10.1016/j.memsci.2015.07.032
ISSN1873-3123
AutoresCongliang Cheng, Zhengjin Yang, Yubin He, Abhishek N. Mondal, Erigène Bakangura, Tongwen Xu,
Tópico(s)Advanced Battery Materials and Technologies
ResumoSemi-interpenetrating polymer networks (sIPN) based on anion exchange membranes (AEMs) for acid recovery process were fabricated by immobilizing polyvinyl chloride (PVC) in dimethylaminoethyl methacrylate (DMAM) and divinylbenzene (DVB) copolymer (P(DMAM-co-DVB)). Prepared membranes were fully characterized in terms of FTIR, TGA, ion exchange capacity (IEC), water uptake (WR), etc. Membrane structure and performance can be tuned by varying the content of PVC and dosage of cross-linking agent as well. Consequence of PVC content plus the cross-linking degree on ion permeability and selectivity was discussed in brief. Results revealed that the prepared membranes possess excellent thermal and acid stability due to the incorporation of chemically stable PVC matrix and the formation of sIPN morphology. Acid dialysis coefficients (UH) appeared in the range of 0.012–0.040 m/h and separation factors (S) ranged from 36 to 61 at 25 °C. These obtained values are much higher than that of commercial membrane DF-120 (0.009 m/h for UH, 18.5 for S). This methodology can be effortlessly scaled up and the obtained membranes could be an encouraging candidate for the acid recovery process via diffusion dialysis.
Referência(s)