Portal de Periódicos da CAPES

Rheology and extrusion of medical‐grade thermoplastic polyurethane

2003; Wiley; Volume: 43; Issue: 12 Linguagem: Inglês

10.1002/pen.10158

1548-2634

Guangyu Lu, Dilhan M. Kalyon, İskender Yılgör, Emel Yılgör,

Injection Molding Process and Properties

Abstract The selection of operating conditions and geometry for the processing of thermoplastic polyurethane, TPU, is a complicated task. This complication arises from the relatively high melting temperature of the crystalline hard blocks and the oxidative and thermal degradation and crosslinking that occur at temperatures that are relatively close to the melting temperature of the TPU. This article documents the rheology, extrusion, and structure development of a medical‐grade TPU. The medical application requires that the additives commonly utilized in the development of polymeric resins, i.e., stabilizers, antioxidants, and lubricant, should be minimized; the TPU of this study contains no additives. At temperatures 10–20°C lower than the melting temperature of the TPU, the morphology of the hard blocks continues to evolve to generate a reversible increase in elasticity and shear viscosity of the TPU with increasing time. At temperatures greater than the melting temperature, the TPU undergoes degradation and crosslinking reactions, which give rise to a permanent increase in the elasticity and the shear viscosity of the TPU. The ramifications of the degradation and crosslinking at temperatures greater than 200°C and morphology modification upon the continuing evolution of the hard blocks at temperatures less than 200°C on the rheology and processing were investigated.