Comparison of different methods for measuring strain induced α-martensite content in austenitic steels
2004; Maney Publishing; Volume: 20; Issue: 12 Linguagem: Inglês
10.1179/026708304x4367
ISSN1743-2847
AutoresJuho Talonen, P. Aspegren, Hannu Hänninen,
Tópico(s)Non-Destructive Testing Techniques
ResumoAbstractSeveral techniques for measuring the strain induced α-martensite content in EN 1.4318 (AISI 301LN) and EN 1.4301 (AISI 304) austenitic stainless steels were compared in order to determine a correlation curve between Ferritescope measurement results and actual α-martensite contents. The studied methods involved Satmagan measurement, magnetic balance measurement, X-ray diffraction, density measurement and quantitative optical metallography. Satmagan, magnetic balance and density measurements were found to give equal α-martensite contents. X-ray diffraction results were affected by the texture but averaging of several diffraction peaks improved the reliability of the results. It was shown that α-martensite can be detected by means of optical metallography, but quantitative analysis is time consuming and inaccurate. The relationship between the Ferritescope results and actual α-martensite contents measured with the other techniques was found to be linear. According to the results, the Ferritescope readings can be converted to actual α-martensite contents by multiplying with a correction factor of 1.7.Keywords: STRAIN INDUCED MARTENSITEAUSTENITIC STAINLESS STEELFERRITESCOPE
Referência(s)