The morphology and crystallography of Ferrous lath martensite. Studies of Fe-20%Ni-5%Mn—II. Transmission electron microscopy
1981; University of Toronto Press; Volume: 29; Issue: 6 Linguagem: Inglês
10.1016/0001-6160(81)90052-3
ISSN1878-0768
Autores Tópico(s)Shape Memory Alloy Transformations
ResumoThis investigation reports a transmission electron microscopy study of the isothermal lathtype martensite in an Fe-20%Ni-5%Mn alloy. All laths showed the Kurdjumov-Sachs orientation relationship: single isolated laths as well as adjacent laths in a packet. Trace analysis shows that the martensite-austenite interfaces are near A, in agreement with optical microscopy, although the boundary is frequently stepped. Adjacent martensite laths in a packet were found to have the same orientation, variant of the Kurdjumov-Sachs relation and habit plane. In all cases (isolated and adjoining laths) the lath substructure consisted of three sets of 〈111〉 screw dislocations in a cross-grid arrangement similar to that previously observed in the untwinned regions of plate martensite in Fe-Ni alloys. Dislocations at the tips of laths and at the lath-lath interfaces were of the same type and arrangement as those found within the laths. No internal twins were observed in the laths. Dans cet article, nous présentons les résultats d'une étude par microscopie électronique en transmission de la martensite isotherme en lattes dans un alliage Fe-20%Ni-5%Mn. Toutes les lattes présentaient la relation d'orientation de Kurdjumov et Sachs, qu'elles soient isolées ou en paquets. L'analyse de traces montre que les interfaces entre la martensite et l'austénite sont proches de A, en accord avec la microscopie optique, bien qu'elles présentent souvent des marches. Des lattes de martensite adjacentes dans un paquet ont la même orientation, les mêmes variantes correspondant à la relation de Kurdjumov et Sachs et le même plan d'accolement. Dans tous les cas (lattes isolées et adjacentes), la sous-structure des lattes consistait en trois familles de dislocations vis 〈111〉 arrangées en un réseau semblable à celui qui avait été observé dans des régions non maclées de plaquettes de martensite dans des alliages Fe-Ni. Les dislocations aux extrémités des lattes et à l'interface lattelatte étaient du même type et présentaient le même arrangement que celles que l'on trouve dans les lattes. Nous n'avons pas observé de macles internes dans les lattes. Der isotherme lattenförmige Martensit in der Legierung Fe-20%Ni-5%Mn wird elektronenmikroskopisch untersucht. Alle Latten wiesen die Orientierungsbeziehung von KurdjumovSachs auf: die vereinzelten und die Latten in den Paketanordnungen. Die Auswertung zeigt in Übereinstimmung mit den optischen Untersuchungen, daβ die Martensit-Austenit-Grenzflächen nahe A liegen; allerdings enthalten diese häufig Stufen. Benachbarte Martensitlatten haben in den Paketen dieselbe Orientierung abweichend von der Kurdjumov-Sachs-Beziehung und Habitebene. In sämtlichen Fällen fand sich in den Latten eine Substruktur von drei Sätzen von 〈111〉-Schraubenversetzungen in einer kreuzweisen Anordnung ähnlich der, die früher in nicht verzwillingten Bereichen des Plattenmartensits gefunden worden waren. Die Versetzungen an der Spitze der Spitze der Latten waren vom selben Typ und ähnlich angeordnet. Innere Zwillinge wurden in den Latten nicht beobachtet.
Referência(s)