Artigo Revisado por pares

APPLICATION OF A DUAL-DISC SEMICONDUCTORS TO A LEAN-BURN OXYGEN SENSOR

1985; Oxford University Press; Volume: 14; Issue: 12 Linguagem: Inglês

10.1246/cl.1985.1831

ISSN

1348-0715

Autores

Yasuhiro Shimizu, Yoshiki Fukuyama, Hiromichi Arai,

Tópico(s)

Acoustic Wave Resonator Technologies

Resumo

Abstract A lean-burn oxygen sensor composed of two different sintered semiconductors was made by electrically contacting the discs of SrAl0.01Ti0.99O3 and Cr2O3 with Pt mesh by mechanical pressing. The resistance-λ′ characteristic of the connected device was investigated in the exhaust gas of oxygen-propane combustion, where λ′ stands for the oxygen excess ratio. It was found that the SrAl0.01Ti0.99O3Cr2O3 device had promising properties for a lean-burn oxygen sensor, because the device exhibited a large change in the resistance in the lean-burn region with a negligible change in the rich-burn region.

Referência(s)
Altmetric
PlumX