Artigo Revisado por pares

Heliohydroelectric (HHE) power generation

1972; Elsevier BV; Volume: 14; Issue: 1 Linguagem: Inglês

10.1016/0038-092x(72)90020-5

ISSN

1471-1257

Autores

M. Ali Kettani, Lenine M. Gonsalves,

Tópico(s)

Particle accelerators and beam dynamics

Resumo

Solar energy can be efficiently converted into electricity by transforming int into hydraulic energy as in nature. This can be done “artificially” when the topographical and hydrological conditions are favorable. For instance, Dawhat Salwah of the Arabian Gulf (Persian Gulf) can be transformed easily into a large water reservoir, by building a dam from Saudi Arabia to Bahrain, and another from Bahrain to Qatar. Because of evaporation, the level of the “closed reservoir” will tend to decrease, inducing a flow to move from the “open sea”, to restore the level to its initial value. Therefore the flow of water evaporated by the sun is transformed into a discharge from the “open sea” to the “closed reservoir”. Solar energy of evaporation has thus been transformed into hydraulic energy. If a physical head, He, is set between the two levels the potential energy thus formed by the discharge, falling along He, could be transformed into electrical power. The value of this power is related to the physical and meteorological characteristics of the chosen “closed basin”. The entire system is studied theoretically as an “electric generator” package, by maximizing parameters for optimum energy conversion efficiency. Il est possible de convertir efficacement l'énergie solaire en électricité en la transformant en énergie hydraulique, comme c'est le cas dans la nature. Lorsque les conditions topographiques et hydrologiques sont favorables, ceci peut être fait artificiellement. On peut transformer facilement Dawhat Salwah dans le golfe Persique, par exemple, en un grand réservoir d'eau en construisant un barrage de l'Arabie Séoudite à Bahrain et un autre de Bahrain à Qatar. L'évaporation fera baisser le niveau du réservoir, ce qui provoquera un courant venant de la mer, qui ramènera le réservoir à son niveau initial. Ainsi, l'eau évaporée par le soleil se transforme en un déversement de la mer dans le réservoir. L'énergie solaire a été de ce fait transformée en énergie hydraulique. Si la différence entre les 2 niveaux est He, l'énergie potentielle qui est produite par le déversement peut être transformée en électricité. Cette énergie dépend des caractéristiques physiques et météorologiques du réservoir choisi. Le système tout entier est analysé théoriquement en tant que génerateur électrique possible, en donnant des valeurs maximum aux paramètres de la conversion optimum d'énergie. La energía solar se puede convertir eficientemente en electricidad mediante su transformación en energía hidraúlica, como ocurre en la naturaleza. Esto se puede hacer “artificialmente” en lugares que reúnen condiciones topográficas e hidrológicas favorables. Por ejemplo, Dawhat Salwah, en el Golfo Arábigo (Golfo Pérsico) podría quedar transformado fácilmente en un gran embalse hidraúlico si se construyese una presa desde Arabia Saudí hasta Bahrein, y otra desde Bahrein hasta Qatar. Como consecuencia de la evaporación, la cota de este “embalse cerrado” tenderá a disminuir, ocasionando el desplazamiento de un caudal de agua desde el “mar abierto” para restablecer la cota a su valor inicial. Por lo tanto, el caudal evaporado por el sol se transforma en una descarga que fluye desde el “mar abierto” al “embalse cerrado”, con lo que la energía solar producto de la evaporación queda convertida en energía hidraúlica. Si se establece un salto fisico, H, entre los dos niveles, la energía potencial así desarrollada por la descarga que desciende por el mismo podria ser transformada en energía eléctrica. El valor de esta energía está en relación a las características físico-meteorológicas de la “cuenca cerrada” elegida. Se presenta un estudio teórico del sistema total a modo de conjunto “generador de electricidad”, con maximización de los parámetros en orden a una conversión energética de eficiencia óptima.

Referência(s)
Altmetric
PlumX