Portal de Periódicos da CAPES

Structural Changes in Wood under Artificial UV Light Irradiation Determined by FTIR Spectroscopy and Color Measurements – A Brief Review

2013; North Carolina State University; Volume: 8; Issue: 1 Linguagem: Inglês

10.15376/biores.8.1.1478-1507

1930-2126

Carmen Alice Teacă, Dan Roşu, Ruxanda Bodîrlău, Liliana Roşu,

Wood and Agarwood Research

UV weathering, a process initiated primarily by the ultraviolet portion of the solar spectrum, causes surface degradation of wood. Additionally, the wetting and drying of wood through precipitation, diurnal and seasonal changes in relative humidity, abrasion by air particulates, temperature changes, atmospheric pollution, oxygen, and human activities, all contribute to the degradation of wood surfaces. Photo-oxidation or photo-chemical degradation affects only the wood surface, starting immediately after exposure to sunlight. Understanding the chemistry of UV degradation of wood requires knowledge of the chemical nature of wood components, the UV spectrum, and the interactions of UV radiation with various chemical structures in wood. Chemical changes can be evidenced by FTIR spectroscopy. Previous study has shown that wood chemical modification with succinic anhydride makes it slightly more stable to the artificial light action than non-modified wood, which might be due to a slight increase in lignin stability to the polychromatic light action. Analysis of color changes on coated wood surfaces for modified wood treated with epoxidized soybean oil (ESO) has shown that lightness (ΔL*) decreases, whereas a*, b*, and ΔE* increase with increasing irradiation time.