Review of Worldwide Activities in Liquid-Fed Pulsed Plasma Thruster
2014; American Institute of Aeronautics and Astronautics; Volume: 30; Issue: 2 Linguagem: Inglês
10.2514/1.b34807
ISSN1533-3876
AutoresAbdolrahim Rezaeiha, Tony Schönherr,
Tópico(s)Plasma Applications and Diagnostics
ResumoNo AccessSurvey PaperReview of Worldwide Activities in Liquid-Fed Pulsed Plasma ThrusterAbdolrahim Rezaeiha and Tony SchönherrAbdolrahim RezaeihaSharif University of Technology, 11365 Tehran, Iran and Tony SchönherrUniversity of Tokyo, Tokyo 113-8656, JapanPublished Online:7 Mar 2014https://doi.org/10.2514/1.B34807SectionsView Full TextPDFPDF Plus ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Burton R. L. and Turchi P. J., "Pulsed Plasma Thruster," Journal of Propulsion and Power, Vol. 14, No. 5, 1998, pp. 716–735. doi:https://doi.org/10.2514/2.5334 JPPOEL 0748-4658 LinkGoogle Scholar[2] Molina-Cabrera P., Herdrich G., Lau M., Fausolas S., Schönherr T. and Komurasaki K., "Pulsed Plasma Thruster: A Worldwide Review and Long-Yearned Classification," International Electric Propulsion Conference, IEPC Paper 2011-340, Sept. 2011. Google Scholar[3] Schönherr T., Nees F., Koizumi H., Komurasaki K. and Arakawa Y., "Plasma Diagnostics in Pulsed Plasma Thruster and Possible Applications," Plasma Application and Hybrid Functionally Materials, Vol. 21, March 2012, pp. 9–10. Google Scholar[4] Rezaeiha A. and Schönherr T., "Analysis of Effective Parameters on Ablative PPT Performance," Aircraft Engineering and Aerospace Technology, Vol. 84, No. 4, 2012, pp. 231–243.doi:https://doi.org/10.1108/00022661211237755 AATEEB CrossrefGoogle Scholar[5] Popov G. A. and Antropov N. N., "Development of Next Generation APPT at RIAME," International Electric Propulsion Conference, IEPC Paper 2007-134, Sept. 2007. Google Scholar[6] Rezaeiha A., Anbarloui M. and Farshchi M., "Design, Development, and Operation of a Laboratory Benchmark Pulsed Plasma Thruster for the First Time in West Asia," Transactions of JSASS, Aerospace Technology Japan, Vol. 9, 2011, pp. 45–50.doi:https://doi.org/10.2322/tastj.9.45 CrossrefGoogle Scholar[7] Schönherr T., "Investigation of Performance and Plasma Dynamics of the Pulsed Plasma Thruster ADD SIMP-LEX," Ph.D. Dissertation, Dept. of Advanced Energy, Univ. of Tokyo, Tokyo, 2011. Google Scholar[8] Benson S. W. and Arrington L. A., "Development of a PPT for the EO-1 spacecraft," AIAA Paper 1999-2276, June 1999. LinkGoogle Scholar[9] Vondra R. J. and Thomassen K. I., "Flight Qualified Pulsed Electric Thruster for Satellite Control," Journal of Spacecraft, Vol. 11, No. 9, 1974, pp. 613–617. doi:https://doi.org/10.2514/3.62141 0022-4650 LinkGoogle Scholar[10] Nawaz A., Albertoni R. and Auweter-Kurtz M., "Thrust Efficiency Optimization of the Pulsed Plasma Thruster SIMP-LEX," Acta Astronautica, Vol. 67, Nos. 3–4, 2010, pp. 440–448. doi:https://doi.org/10.1016/j.actaastro.2010.03.006 AASTCF 0094-5765 CrossrefGoogle Scholar[11] Kazeev M. N. and Kozlov V. F., "Ablation-Fed Discharge Characteristics," International Electric Propulsion Conference, IEPC Paper 2009-249, 2009. Google Scholar[12] Antropov N. N., Danshov Y., Diakonov G. A., Kabelev B., Lysyy S., Lyubinskaya N. V., Menshikov V., Popov G. A., Semenikhin S. A., Tyutin V. K. and Yakovlev V. N., "Ablative Pulsed Plasma Thruster for the Small Satellite Soyuz-Sat-O," International Conference on Space Propulsion, Paper SP2012, May 2012. Google Scholar[13] Antropov N. N., Bogatiy A. V., Diakonov G. A., Lyubinskaya N. V., Popov G. A., Semenikhin S. A., Tyutin V. K., Khrustalev M. M. and Yakovlev V. N., "New Stage of Ablative Pulsed Plasma Thruster Development at RIAME," Space Journal of "Lavochkin Association," Vol. 2011, Nov. 2011, pp. 30–40 (in Russian). Google Scholar[14] Palumbo D. J. and Guman W. J., "Effects of Propellant and Electrode Geometry on Pulsed Ablative Plasma Thruster Performance," Journal of Spacecraft and Rockets, Vol. 13, No. 3, 1976, pp. 163–167. doi:https://doi.org/10.2514/3.57077 JSCRAG 0022-4650 LinkGoogle Scholar[15] Kamhawi H., Pencil E. J. and Haag T., "High Thrust-to-Power Rectangular Pulsed Plasma Thruster," AIAA Paper 2002-3975, July 2002. Google Scholar[16] Edamitsu T., Tahara H. and Yoshikawa T., "Effects of Cavity Length and Material on Performance Characteristics of a Coaxial Pulsed Plasma Thruster," International Symposium on Space Technology and Science, ISTS Paper 2004-b-6, May–June 2004. Google Scholar[17] Hisatsune K., Matsumoto Y., Ohisa H. and Tachibana T., "Use of Composite Propellants as for Electric Thrusters," International Electric Propulsion Conference, IEPC Paper 1999-015, Oct. 1999. Google Scholar[18] Mashidori H. and Tachibana T., "Use of Solid Chemical Propellants for Coaxial Pulsed Plasma Thrusters," International Symposium on Space Technology and Science, ISTS Paper 2006-b-16, June 2006. Google Scholar[19] Saito T., Koizumi H. and Kuninaka H., "Powdered Propellant PPT with Automatic Feed System," AIAA Paper 2009-1381, Jan. 2009. LinkGoogle Scholar[20] Ziemer J., Choueiri E. and Birx D., "Is the Gas-fed PPT an Electromagnetic Accelerator? An Investigation Using Measured Performance," AIAA Paper 1999-2289, June 1999. LinkGoogle Scholar[21] Ziemer J. K., "Performance Scaling of Gas-fed Pulsed Plasma Thrusters," Ph.D. Dissertation, Dept. of Mechanical and Aerospace Engineering, Princeton Univ., Princeton, NJ, 2001. Google Scholar[22] Ziemer J. K. and Petr R. A., "Performance of Gas Fed Pulsed Plasma Thrusters Using Water Vapor Propellant," AIAA Paper 2002-4273, July 2002. LinkGoogle Scholar[23] Ziemer J. K., Cubbin E. A. and Choueiri E. Y., "Performance Characterization of a High Efficiency Gas-fed Pulsed Plasma Thruster," AIAA Paper 1997-2925, July 1997. LinkGoogle Scholar[24] Fearn D. G., "Late-1960s Project at the Royal Aerospace Establishment, Farnborough," International Electric Propulsion Conference, IEPC Paper 07-290, Sept. 2007. Google Scholar[25] Scharlemann C. A., "Investigation of Thrust Mechanism in a Water-Fed Pulsed Plasma Thruster," Ph.D. Dissertation, Dept. of Aerospace, Applied Mechanics and Aviation, The Ohio State Univ., Columbus, Ohio, 2003. Google Scholar[26] Kakami A., Koizumi H., Komurasaki K. and Arakawa Y., "Liquid Propellant PPT Performance," International Symposium on Space Science and Technology, ISTS Paper 2002-b-15, June 2002. Google Scholar[27] Koizumi H., Komurasaki K. and Arakawa Y., "Development of Thrust Stand for Low Impulse Measurement from Microthrusters," Review of Scientific Instruments, Vol. 75, No. 10, 2004, pp. 3185–3190. doi:https://doi.org/10.1063/1.1790568 RSINAK 0034-6748 CrossrefGoogle Scholar[28] Koizumi H., Kakami A., Furuta Y., Komurasaki K. and Arakawa Y., "Liquid Propellant Pulsed Plasma Thruster," International Electric Propulsion Conference, IEPC Paper 2003-087, March 2003. Google Scholar[29] Kakami A., Koizumi H., Komurasaki K. and Arakawa Y., "Design and Performance of Liquid Propellant Pulsed Plasma Thruster," Vacuum, Vol. 73, 2004, pp. 419–425. doi:https://doi.org/10.1016/j.vacuum.2003.12.108 VACUAV 0042-207X CrossrefGoogle Scholar[30] Koizumi H., Kawazoe Y., Komurasaki K. and Arakawa Y., "Performance Improvement of a Liquid Propellant Pulsed Plasma Thruster," International Electric Propulsion Conference, IEPC Paper 2005-069, Oct.–Nov. 2005. Google Scholar[31] Koizumi H., Noji R., Komurasaki K. and Arakawa Y., "Plasma Flow Behaviors and Their Effects on the Performance of Pulsed Plasma Thrusters," International Electric Propulsion Conference, IEPC Paper 2007-189, Sept. 2007. Google Scholar[32] Koizumi H., Furuta Y., Watanabe K., Komurasaki K., Saso A. and Arakawa Y., "Plasma Acceleration Processes on Liquid Propellant PPT," International Symposium on Space Science and Technology, ISTS Paper 2004-b-09, June 2004. Google Scholar[33] Markusic T. E., "Liquid-Metal-Fed Pulsed Electromagnetic Thrusters for In-Space Propulsion," 52th Proceedings of JANNAF (Joint Army, Navy, NASA, Air Force) Propulsion Meeting, JPM-N2004-0076885, Las Vegas, NV, May 2004. Google Scholar[34] "Aerospace Micro-Technologies Catalog," John Hopkins Univ. Applied Physics Lab., Rept. 07-00963-AMT, Laurel, MD, 2007. Google Scholar[35] Böhrk H., Lau M., Herdrich G., Hald H. and Röser H.-P. "Porous Flow Control Element for Pulsed Plasma Thrusters," CEAS Space Journal, Vol. 3, Nos. 1–2, June 2012, pp. 1–6. doi:https://doi.org/10.1007/s12567-011-0019-5 1868-2502 CrossrefGoogle Scholar[36] Herdrich G., Bauder U., Boxberger A., Gabrielli R. A., Lau M., Petkow D., Pfeiffer M., Syring C. and Fasoulas S., "Advanced Plasma (Propulsion) Concepts at IRS," Advances in Applied Plasma Science, Vol. 8, 2011, pp. 1–6. Google Scholar[37] Masui S., Okada T., Kitatomi M., Kakami A. and Tachibana T., "Pulsed Plasma Thruster Using Dimethyl Ether as Propellant," International Symposium on Space Technology and Science, ISTS Paper 2011-b-04, June 2011. Google Scholar[38] Wang S., Liu X., Yang L., Wu Z., Cheng Y. and Wang N., "Numerical Simulation of a Water Propellant Pulsed Plasma Thruster," AIAA Paper 2012-4280, July–Aug. 2012. LinkGoogle Scholar[39] Hirata M. and Murakami H., "Exhaust Gas Analysis of a Pulsed Plasma Engine," International Electric Propulsion Conference, IEPC Paper 1984-52, 1984. Google Scholar[40] Spanjers G. G., Lotspeich J. S., McFall K. A. and Spores R. A., "Propellant Losses Because of Particulate Emission in a Pulsed Plasma Thruster," Journal of Propulsion and Power, Vol. 14, No. 4, 1998, pp. 554–559. doi:https://doi.org/10.2514/2.5313 JPPOEL 0748-4658 LinkGoogle Scholar[41] Guman W. J., "Pulsed Plasma Technology in Microthrusters," Fairchild Hiller Corp., AFAPL-TR-68-132, Farmingdale, NY, Nov. 1968. Google Scholar[42] Myers R. M., Arrington L. A., Pencil E. J., Carter J., Heminger J. and Gatsonis N., "Pulsed Plasma Thruster Contamination," AIAA Paper 1996-2729, July 1996. LinkGoogle Scholar[43] Ziemer J. K. and Choueiri E. Y., "Scaling Laws for Electromagnetic Pulsed Plasma Thrusters," Plasma Sources Science and Technology, Vol. 10, No. 3, 2001, pp. 395–405. doi:https://doi.org/10.1088/0963-0252/10/3/302 PSTEEU 1361-6595 CrossrefGoogle Scholar[44] Schönherr T., Abe Y., Okamura K., Koizumi H., Arakawa Y. and Komurasaki K., "Influence of Propellant in the Discharge Process of PPT," AIAA Paper 2012-4278, July–Aug. 2012. LinkGoogle Scholar Next article
Referência(s)