Artigo Acesso aberto Revisado por pares

Open-Water Thrust and Torque Predictions of a Ducted Propeller System with a Panel Method

2012; Hindawi Publishing Corporation; Volume: 2012; Linguagem: Inglês

10.1155/2012/474785

ISSN

1542-3034

Autores

J. Baltazar, J. A. C. Falcão de Campos, Johan Bosschers,

Tópico(s)

Vibration and Dynamic Analysis

Resumo

This paper discusses several modelling aspects that are important for the performance predictions of a ducted propulsor with a low-order Panel Method. The aspects discussed are the alignment of the wake geometry, the influence of the duct boundary layer on the wake pitch, and the influence of a transpiration velocity through the gap. The analysis is carried out for propeller Ka4-70 operating without and inside a modified duct 19A, in which the rounded trailing edge is replaced by a sharp trailing edge. Experimental data for the thrust and torque are used to validate the numerical results. The pitch of the tip vortex is found to have a strong influence on the propeller and duct loads. A good agreement with the measurements is achieved when the wake alignment is corrected for the presence of the duct boundary layer.

Referência(s)