Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Calcium phosphate precipitation in a fluidized bed in relation to process conditions: A black box approach

1996; Elsevier BV; Volume: 30; Issue: 7 Linguagem: Inglês

10.1016/0043-1354(96)00043-7

1879-2448

Marcelo Martins Seckler, O.S.L. Bruinsma, G.M. van Rosmalen,

Constructed Wetlands for Wastewater Treatment

The precipitation features of calcium phosphate in a fluidized bed reactor in the concentration range between 5 and 100 mg P 1−1 were studied, and the conditions for optimum phosphate removal efficiency were established. The supply of calcium ions should be such that a Ca/P molar ratio of 3 at the inlet of the reactor is achieved. If the water to be treated does not contain magnesium or carbonate ions, the supply of base should suffice to promote a conversion of 50–65% of the incoming phosphate to the solid phase. In the presence of carbonate and magnesium ions, the base supply should provide a conversion of 80–95%. Magnesium and carbonate ions did not have a detrimental effect on the phosphate removal efficiency for inlet concentrations of up to 4.8 × 10−3 (Mg/P < 2 mol mol−1) and 1.8 × 10−3 kmol m−3, respectively. The feasibility of a process based on the precipitation of magnesium phosphate instead of calcium phosphate was demonstrated for waters with a low calcium content (Ca/P < 0.8 mol mol−1). Finally a method is presented to select process conditions where co-precipitation of unwanted phases can be avoided.