Portal de Periódicos da CAPES

Hydrodynamic problems of heavy liquid metal coolants technology in loop-type and mono-block-type reactor installations

2007; Elsevier BV; Volume: 237; Issue: 15-17 Linguagem: Inglês

10.1016/j.nucengdes.2007.03.008

1872-759X

Yuri I. Orlov, A. D. Efanov, П. Н. Мартынов, V. A. Gulevsky, Al’bert Konstantinovich Papovyants, Yuri D. Levchenko, Vladimir V. Ulyanov,

Nuclear Engineering Thermal-Hydraulics

Abstract In the report, the influence of hydrodynamics of the loop with heavy liquid metal coolants (Pb and Pb–Bi) on the realization methods and efficiency of the coolant technology for the reactor installations of loop, improved loop and mono-block type of design has been studied. The last two types of installations, as a rule, are characterized by the following features: availability of loop sections with low hydraulic head and low coolant velocities, large squares of coolant free surfaces; absence of stop and regulating valve, auxiliary pumps on the coolant pumping-over lines. Because of the different hydrodynamic conditions in the installation types, the tasks of the coolant technology have specific solutions. The description of the following procedures of coolant technology is given in the report: purification by hydrogen (purification using gas mixture containing hydrogen), regulation of dissolved oxygen concentration in coolant, coolant filtrating, control of dissolved oxygen concentration in coolant. It is shown that change of the loop design made with economic purpose and for improvement of the installation safety cause additional requirements to the procedures and apparatuses of the coolant technology realization.