Bioaugmentation for treating transient or continuous p-nitrophenol shock loads in an aerobic sequencing batch reactor
2012; Elsevier BV; Volume: 123; Linguagem: Inglês
10.1016/j.biortech.2012.07.014
ISSN1873-2976
AutoresMariángel Martín‐Hernández, María Eugenia Suárez-Ojeda, Julián Carrera,
Tópico(s)Analytical chemistry methods development
ResumoBioaugmentation with an enriched microbial population was applied in an aerobic sequencing batch reactor (SBR) receiving transient or continuous shock loads of p-nitrophenol (PNP). The effect of the amount of biomass added for bioaugmentation was assessed by using two different dosages (2% or 5% w/w of the total biomass in the seeded SBR). In both cases, total PNP removal was achieved during the transient PNP shock load occurring after bioaugmentation. However, after a long PNP starvation period the only experiment still showing total PNP removal during a second PNP shock load was the one where a dosage of 5% w/w was applied. The results suggested that the dosage is a key factor for the implementation of a successful bioaugmentation strategy. In addition, the performance of a bioaugmented SBR receiving a continuous PNP shock load was enhanced when compared to a non-bioaugmented SBR.
Referência(s)