Portal de Periódicos da CAPES

Chemical Vapor Deposition of Niobium Disulfide Thin Films

2004; Wiley; Volume: 2004; Issue: 22 Linguagem: Inglês

10.1002/ejic.200400308

1099-0682

Claire J. Carmalt, Emily S. Peters, Ivan P. Parkin, Troy D. Manning, Andrew L. Hector,

2D Materials and Applications

Abstract Atmospheric pressure chemical vapor deposition (APCVD) of niobium sulfide coatings was achieved on glass substrates from the reaction of NbCl 5 and S(SiMe 3 ) 2 , t Bu 2 S 2 , t BuSH, or HSCH 2 CH 2 SH at 250−600 °C. The niobium sulfide films grown at temperatures above 500 °C were crystalline, and powder X‐ray diffraction showed that two polytypes of NbS 2 were produced. The sulfur precursor used is fundamental to the polytype of NbS 2 obtained; films that are grown from the APCVD reaction of NbCl 5 and S(SiMe 3 ) 2 or t Bu 2 S 2 at 500−600 °C crystallize into the 1T structure, whereas those grown from the APCVD reaction of NbCl 5 and t BuSH or HSCH 2 CH 2 SH at 500−600 °C crystallize into the 3R structure. Energy dispersive X‐ray analysis (EDXA) studies gave elemental ratios close to the expected 1:2 ratio for Nb:S. Scanning electron microscopy (SEM) revealed surface morphologies consistent with an island growth mechanism. The films were also characterized using Raman and X‐ray photoelectron spectroscopy, both of which showed differences consistent with the formation of the two polytypes, 1T and 3R‐NbS 2 . (© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2004)