Inverse transposition by the RAG1 and RAG2 proteins: role reversal of donor and target DNA
2002; Springer Nature; Volume: 21; Issue: 23 Linguagem: Inglês
10.1093/emboj/cdf630
ISSN1460-2075
Autores Tópico(s)RNA modifications and cancer
ResumoArticle1 December 2002free access Inverse transposition by the RAG1 and RAG2 proteins: role reversal of donor and target DNA I-hung Shih I-hung Shih Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author Meni Melek Meni Melek Present address: Salamandra, LLC, 4600 North Park Avenue, Suite 100, Chevy Chase, MD, 20815 USA Search for more papers by this author Nadeesha D. Jayaratne Nadeesha D. Jayaratne Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author Martin Gellert Corresponding Author Martin Gellert Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author I-hung Shih I-hung Shih Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author Meni Melek Meni Melek Present address: Salamandra, LLC, 4600 North Park Avenue, Suite 100, Chevy Chase, MD, 20815 USA Search for more papers by this author Nadeesha D. Jayaratne Nadeesha D. Jayaratne Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author Martin Gellert Corresponding Author Martin Gellert Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA Search for more papers by this author Author Information I-hung Shih1, Meni Melek2, Nadeesha D. Jayaratne1 and Martin Gellert 1 1Laboratory of Molecular Biology, National Institute of Diabetes and Digestive and Kidney Diseases, National Institutes of Health, Building 5, Room 241, Bethesda, MD, 20892 USA 2Present address: Salamandra, LLC, 4600 North Park Avenue, Suite 100, Chevy Chase, MD, 20815 USA ‡I-h.Shih and M.Melek contributed equally to this work *Corresponding author. E-mail: [email protected] The EMBO Journal (2002)21:6625-6633https://doi.org/10.1093/emboj/cdf630 PDFDownload PDF of article text and main figures. ToolsAdd to favoritesDownload CitationsTrack CitationsPermissions ShareFacebookTwitterLinked InMendeleyWechatReddit Figures & Info The lymphoid-specific proteins RAG1 and RAG2 initiate V(D)J recombination by introducing DNA double-strand breaks at the recombination signal sequences (RSSs). In addition to DNA cleavage, the versatile RAG1/2 complex is capable of catalyzing several other reactions, including hybrid joint formation and the transposition of signal ends into a second DNA. Here we show that the RAG1/2 complex also mediates an unusual strand transfer reaction, inverse transposition, in which non-RSS DNA is cleaved and subsequently transferred to an RSS sequence by direct transesterification. Characterization of the reaction products and requirements suggests that inverse transposition is related to both hybrid joint formation and signal-end transposition. This aberrant activity provides another possible mechanism for some chromosomal translocations present in lymphoid tumors. Introduction The assembly of immunoglobulin (Ig) and T cell receptor (TCR) genes by V(D)J recombination generates much of the diversity of the antigen receptor repertoire (reviewed in Gellert, 2002). This DNA rearrangement requires the presence of conserved recombination signal sequences (RSSs) marking the boundaries of the coding segments. The assembly is initiated by DNA cleavage by the RAG1 and RAG2 proteins at sites next to the RSS sequences (Oettinger, 1992; McBlane et al., 1995). Efficient recombination requires two different RSSs containing conserved heptamer and nonamer sequences separated by non-conserved spacers of 12 or 23 bp, respectively. This 12/23 rule, enforced at the cleavage step of recombination, ensures appropriate joining of coding segments of V to J, or V to D to J segments (Tonegawa, 1983). The later stages of recombination involve the joining of pairs of coding ends and pairs of signal ends by non-homologous end joining machinery (Bogue and Roth, 1996; Jeggo, 1998; Ma et al., 2002). The RAG1/2 complex recognizes and binds to RSSs, and in the presence of high mobility group proteins HMG1 or HMG2 is able to form a stable synaptic complex with the 12 and 23 RSSs (Hiom and Gellert, 1998). In normal V(D)J recombination, the RAG1/2–DNA complex catalyzes a series of phosphoryl transfer reactions, as depicted in Figure 1A. First, the DNA at the 5′ boundary of the RSS is nicked by RAG1/2, and then the 3′-OH liberated on the coding flank in the first step attacks the opposite strand to form a hairpin coding end and a blunt signal end (McBlane et al., 1995; van Gent et al., 1995). Efficient coupled cleavage at a pair of 12 and 23 RSSs occurs in the presence of Mg2+ in vitro (Eastman et al., 1996; van Gent et al., 1996), while additional uncoupled DNA cleavage at one RSS is observed in the presence of Mn2+ (McBlane et al., 1995). Figure 1.Reactions mediated by RAG1/2 proteins. RAG1 and RAG2 proteins catalyze various reactions including DNA nicking, hairpin formation and strand transfer. Schematic presentation of (A) V(D)J recombination; (B) hybrid joint formation; (C) signal-end transposition; and (D) inverse transposition are shown. 12 and 23 RSS sequences are indicated by open and filled triangles. Non-RSS and RSS DNA are indicated by red and black lines, respectively. Non-RSS and 23 RSS DNA are depicted by thin lines to distinguish them from 12 RSS. Orientation of dsDNA is indicated by the 5′ end on one of two strands in either case. A half-arrow at the tip of a line represents a terminal 3′-OH. The two combined ovals are a schematic presentation of a synaptic complex. Download figure Download PowerPoint Besides the reactions mentioned above, RAG1/2 catalyzes other reactions that lead to aberrant junctions or DNA transposition (Figure 1B–D). It has been shown that RAG1/2 mediates rejoining of the cleaved coding and signal ends to generate hybrid or open- and-shut joints in vitro (Figure 1B; Melek et al., 1998). Such joints have also been observed in vivo, both on artificial substrates and at the antigen receptor loci (Lewis et al., 1988; Morzycka-Wroblewska et al., 1988; Lewis and Hesse, 1991). Moreover, RAG1/2 catalyzes the transposition of signal ends into target plasmids or oligonucleotide substrates in vitro, as shown in Figure 1C; (Agrawal et al., 1998; Hiom and Gellert, 1998). RAG1/2 can further cleave the branched transposition intermediate by disintegration, an activity similar to that of retroviral integrases (Melek and Gellert, 2000). It has been suggested that this RAG1/2-mediated signal-end transposition (also known as RSS transposition) may be responsible for a subset of the chromosomal translocations found in lymphoid tumors (Hiom et al., 1998; Melek and Gellert, 2000). Here, we show that RAG1/2 can perform an alternative mode of transposition (Figure 1D). When complexed to an RSS, RAG1/2 can bind and cleave a non-RSS sequence to form a hairpin and a blunt end, and then catalyze the strand transfer of the blunt non-RSS end to the RSS sequence. This new mode of strand transfer uses the transposition donor and target in an inverted manner from the signal-end RSS transposition, and thus we call it 'inverse transposition'. The mechanism of this reaction has similarities to both RAG1/2-mediated signal-end transposition and hybrid joint formation. As discussed below, this process also provides an alternative mechanism for formation of the inter-chromosomal translocations that are characteristic of B and T cell tumors. Results Inverse transposition mediated by RAG1 and RAG2 The RAG1/2-mediated RSS transposition previously described covalently connects the 3′-OH on the cleaved signal ends to a target DNA. A plasmid-based assay was developed in earlier studies for the detection of signal-end transposition, using a 32P-labeled RSS-containing oligonucleotide and a higher molecular weight plasmid target (Hiom et al., 1998). After signal-end transposition, label from the 5′ end of the bottom strand (substrate 2, Figure 2A) will become covalently attached to the pBR322 plasmid, leading to retarded migration of radioactivity on a native agarose gel (Figure 2C, lane 2, left panel). Figure 2.Transposition of non-RSS sequence mediated by RAG1 and RAG2 proteins. (A) Schematic drawings of oligonucleotides used in the plasmid assay for inverse transposition. The position of radioactive label on the bottom strand of an RSS-containing oligonucleotide is indicated by an asterisk. The top and bottom strands are defined by the orientation of the RSS sequence. Either intact (substrates 2 and 4) or pre-nicked dideoxy (substrates 1 and 3) oligonucleotides were used. The labeled oligonucleotide was incubated with supercoiled pBR322 DNA in the presence of RAG1/2, HMG1 and Mg2+ at 37°C for 2 h. Reaction samples were deproteinized and analyzed by agarose gel electrophoresis. (B) Strand transfer of the coding sequence to a non-RSS plasmid requires both RAG1 and RAG2 proteins. In addition to 3′-32P-labeled intact substrate (substrate 4), pBR322 plasmid and reaction buffer, lanes 1, 2 and 3 (all from the same experiment) contain purified RAG1, purified RAG2 and co-expressed RAG1/2 proteins, respectively. The reactions were analyzed on native agarose gels. N, nicked circular plasmid; L, linear plasmid; M, molecular marker of λ HindIII ladder. (C) Covalent strand connection of the inverse- transposition products was analyzed by comparing the deproteinized inverse-transposition products on a native gel (1.2%, left panel) and an alkaline denaturing gel (0.8%, right panel). The substrate for each reaction is indicated. 1× and 2× indicate the products with a single and double length of the linear single-stranded plasmid, respectively. Download figure Download PowerPoint In this assay, signal-end transposition should not transfer radioactive label from the 3′ end of the bottom strand to the plasmid target (Figure 1). Nevertheless, starting with a 3′-labeled 12 RSS (substrate 4, Figure 2A), we detected another type of strand transfer in which the labeled coding flank had been covalently attached to the plasmid. We term this reaction inverse transposition. As shown in Figure 2B, the 3′-labeled coding end was associated with DNA species of high molecular weight. The mobility of the major product corresponded to a pBR322 linear molecule (Figure 2B, lane 3, lower band); a less intense band with the mobility of a nicked circular plasmid was also observed (upper band). Similar high molecular weight products were formed in reactions with a 3′-labeled 23 RSS oligonucleotide (data not shown). This strand transfer depended on both the RAG1 and RAG2 proteins (Figure 2B, lane 3). The individual RAG1 or RAG2 proteins were inactive (Figure 2B, lanes 1 and 2), eliminating the possibility that this activity was due to a contaminant enzyme co-purifying with the RAG proteins. Like other RAG1/2-mediated activities, inverse transposition required HMG1 protein (van Gent et al., 1997) and divalent metal ions. Among the divalent metal ions tested, only Mg2+ and a mixture of Mn2+and Mg2+ ('Mn2+ conditions'; Ramsden et al., 1997), but not Ca2+, supported this activity (data not shown). In contrast to the signal-end transposition, there was more inverse transposition in the Mn2+ conditions than in Mg2+ alone. In addition, the reaction was stimulated in the presence of DMSO, which was therefore used in the following experiments (data not shown). These reaction conditions would also support cleavage at the RSS. However, hairpin formation on the coding end adjoining the RSS was not necessary for inverse transposition. A pre-nicked substrate with a dideoxynucleotide at the end of the coding sequence to block hairpin formation (Figure 2A, substrate 3) was still an effective substrate for inverse transposition. This substitution would also prevent the RSS oligonucleotide from acting as the donor in the strand transfer reaction (see below). Analysis of the inverse-transposition products Examination of the high molecular weight products from inverse transposition confirmed that the bottom strand of the coding sequence was covalently joined to the plasmid DNA. The covalent strand connection of these products was analyzed by comparing the deproteinized products on native and alkaline denaturing gels (Figure 2C). Strand transfer products were detected on both types of gels in reactions with a 3′-labeled 12 RSS (Figure 2C, substrate 4), suggesting that the coding end was covalently linked to the plasmid. This kind of covalent linkage was also detected when the 3′-labeled pre-nicked substrate carried a dideoxy group at the 3′ nick (Figure 2C, substrate 3), suggesting that the hydroxyl nucleophile for the strand transfer was provided by the non-RSS containing plasmid DNA. In comparison, the product resulting from a 5′-labeled intact RSS oligonucleotide was that expected for RSS transposition: the signal end was covalently linked to the plasmid (Figure 2C, substrate 2). However, when a 5′-labeled pre-nicked substrate carried a dideoxy group at the nick, high molecular weight products were not seen on the denaturing gel (Figure 2C, substrate 1). The dideoxy group blocked hairpin formation at the RSS boundary and prevented liberation of the 3′-OH on the signal end, which is required for covalent linkage of the signal end to the plasmid in the signal-end transposition. The small amount of high molecular weight product observed with this substrate on the native gel represented a branched molecule generated from inverse transposition. As shown in the third step of Figure 1D, the signal sequence may be held on the plasmid by base pairing to the bottom strand of the coding sequence and would then remain associated in native, but not denaturing, gel electrophoresis. Denaturing gel electrophoresis revealed two species of inverse-transposition products, one with mobility corresponding to the linear single-stranded plasmid (1×) and the other to a species twice as long (2×) (Figure 2C, substrates 3 and 4 on the denaturing gel). Partial nuclease digestion indicated that the 2× species contained a hairpin end in the linear plasmid (Figure 3). When the deproteinized products were fractionated by two-dimensional gel electrophoresis, first on a native and then on an alkaline denaturing gel, the major band corresponding to the linear dsDNA in the first dimension (L species) was resolved into two bands after denaturation (Figure 3B,2L and 1L). The minor band corresponding to nicked circles in the first dimension (N species) remained as a single species 1N in the second-dimension alkaline gel. 2L was the major product (∼70%) with a chain length (∼8.7 kb) twice that of a linear plasmid (4.3 kb). This double-length species reduced to a plasmid-length band (co-migrating with 1L) when the sample was partially digested with mung bean nuclease after the inverse-transposition reaction (Figure 3B, right panel). Partial digestion by mung bean nuclease has been used previously to identify hairpin structures (Melek and Gellert, 2000). Therefore, 2L is a linear plasmid molecule with a hairpin end, while 1L and 1N represented a topologically linear plasmid-length DNA and a plasmid-length nicked circle, respectively (Figure 3A). Figure 3.Hairpin structure on the plasmid DNA resulting from inverse transposition. (A) Inverse-transposition reactions with an intact 3′-32P-12 RSS oligonucleotide (*) and supercoiled pBR322 were carried out in the presence of RAG1/2, HMG1 and 5 mM Mg2+/0.5 mM Mn2+ (Mn2+ conditions) at 37°C for 2 h, as described in Materials and methods. Predicted configurations of the inverse-transposition products are shown. (B) Two-dimensional gel analysis of the inverse-transposition product. The reaction product was treated with mung bean nuclease or with mock digestion before deproteinization, and analyzed by two-dimensional gel electrophoresis. The first dimension was fractionated on a 1.2% native agarose gel, and the second dimension on a 1% alkaline denaturing gel. Three species, 1L, 2L and 1N, were detected. The numbers on the left indicate the positions of molecular markers. Download figure Download PowerPoint The variety of product configurations suggests that inverse transposition results from several DNA intermediates. The 3′-OH nucleophile on the non-RSS containing plasmid could be generated by a simple nick, or a 3′-OH on the opposite strand would arise if hairpin formation followed nicking. The subsequent transesterification by the hydroxyl groups from these two structures would lead to products 1N and 2L, respectively. Furthermore, 2L could undergo a second strand transfer, with the liberated 3′-OH on the signal end attacking the hairpin structure on the plasmid, and thus generate 1L. Nicking and cleavage of non-RSS containing DNA by RAG1/2 proteins As suggested by the inverse-transposition products, the RAG1/2 proteins should be able to nick and cleave non-RSS DNA to liberate a 3′-OH group and use it as a nucleophile in the subsequent strand transfer reaction. To look for these species, we examined the binding, cleavage and inverse transposition of RAG1/2 proteins on short oligonucleotides that did not contain an RSS sequence. Binding to RAG1/2 proteins was observed by mobility-shift assay with non-RSS DNA oligonucleotides of 50 bp and longer in the absence of RSS DNA. However, binding of non-RSS DNA was not as strong as that of RSS DNA, and was readily competed by RSS oligonucleotides. A small amount of mixed paired complex containing a RSS and a non-RSS DNA was also observed (data not shown). These non-RSS oligonucleotides were further examined to see if they could serve as a strand transfer donor with the 3′-labeled 12 RSS as the target. Higher molecular weight products, corresponding to the 3′-labeled coding flank covalently attached to a fragment of the donor, were observed with DNA oligonucleotides that are long enough to bind to RAG1/2 (Figure 4A, lanes 3–6). Figure 4.RAG1/2-mediated activities on non-RSS DNA. (A) Trans position of non-RSS oligonucleotides to a 12 RSS sequence. Inverse-transposition reaction was carried out with 3′-32P-12-RSS (*) oligonucleotides and unlabeled non-RSS DNA oligonucleotides 40–80 bp in length, under the same reaction conditions as described in Figure 3. The drawings indicate the substrate, hairpin cleavage product and inverse-transposition products. The non-RSS oligonucleotides in lanes 3–6 are IhS101/102, MM569/570, MM567/568 and MM565/566, respectively. (B) RAG1/2-mediated cleavage of non-RSS DNA. The 5′-32P-labeled (*) non-RSS DNA oligonucleotide MM569/570 (60 bp) was subjected to RAG1/2 cleavage in the presence or absence of unlabeled 23 RSS. Mg2+ was at 5 mM and Ca2+ at 4 mM. 'Mn' indicates the Mn2+ conditions described in Materials and methods. The drawings indicate linear and hairpin cleavage products as well as the substrate. Download figure Download PowerPoint Furthermore, RAG1/2 was able to cleave non-RSS oligonucleotides, generating shorter-length products in the presence of either Mg2+ or under the Mn2+ conditions. Short products were only observed in reactions that also contained RSS DNA, suggesting that cleavage of the labeled non-RSS oligonucleotide depended on the presence of unlabeled RSS DNA (Figure 4B). Consistent with the results from inverse transposition, cleavage was greater under the Mn2+ conditions than in Mg2+ alone. Sequence requirement for inverse-transposition activity To examine whether the RAG1/2 proteins used pseudo RSS sites on the plasmid for inverse transposition, we analyzed the sequences at the insertion junctions. The insertion junction sequence was PCR amplified with a primer complementary to the bottom strand of the coding sequence and other primers complementary to the pBR322 (Figure 5A); the amplified DNAs were subsequently cloned and sequenced. The sequence analysis revealed several interesting features. First, a 3′ cytosine was strongly preferred at the break point on the plasmid, but there was very weak conservation within the surrounding sequence (Figure 5B). The first seven positions 3′ of the break site have a remote similarity to the RSS heptamer, but no nonamer-like sequence was observed. Nonetheless, when testing the sequence preference for the inverse transposition using the oligonucleotide assay, a sequence derived from Figure 5B was a more effective substrate than a random sequence of the same length (data not shown), suggesting some sequence effect on the inverse transposition. Secondly, for the majority of reaction products sequenced, nucleophilic attack by the 3′-OH of plasmid DNA was not always precisely at the boundary of coding and signal sequences. Among the 17 individual insertion junctions that were sequenced, ∼70% were within 2 bp from the boundary, but a few were more than 5 bp away (Figure 5C). Figure 5.Sequence analysis of insertion junctions between coding sequence and non-RSS DNA. (A) Schematic presentation of PCR amplification and cloning of the insertion junction. A primer complementary to the bottom strand of the coding sequence, and one of four primers complementary to the plasmid sequence, were used for PCR amplification and the amplified fragments were cloned into pCR2.1 vector for further sequence analysis. (B) Pictogram analysis of the break site sequences on non-RSS DNA. The size of each letter represents the frequency of appearance for the nucleotide at that position. The sequence analysis of 20 bp on each side of the break point is shown (17 sequences in total). Nucleotides that appear with a frequency >50% at that position are indicated above the pictogram. X represents no significant preference at that position. (C) The insertion sites on the 12 RSS sequence from inverse transposition. Arrows indicate the insertion sites on the 12 RSS, where the bottom strand connects to the 3′ end of the non-RSS DNA. The RSS sequence is underlined while the conserved heptamer and nonamer sequences are indicated by lower case letters. Each arrow represents the insertion site determined from 1 of 17 sequenced clones. The majority of strand transfer (70%) occurs within 2 bp of the boundary. (D) Effect of RSS mutations on inverse transposition. Inverse-transposition activity was measured using the plasmid assay described in Figure 3 with consensus and mutant RSS sequences. The sequence of each mutant RSS tested is shown; upper and lower case letters represent consensus and mutant nucleotides, respectively. The non-RSS oligonucleotide is MM569/570 (see Materials and methods for the exact sequence). Download figure Download PowerPoint The RSS sequence requirement for the target of inverse transposition is less stringent than that for cleavage or signal-end transposition. We examined the RSS requirements using a set of altered 23 RSS oligonucleotides previously tested for other RAG1/2-mediated activities (Ramsden et al., 1996; Melek and Gellert, 2000). DNA oligonucleotides that did not contain any RSS-like sequence did not act as donors in inverse transposition (Figure 5D). While the effects of mutations on signal-end transposition parallels that on the hairpin formation, inverse-transposition activity was much less affected by these mutations. For example, mutation of the first, second or third position of the heptamer, or complete ablation of the heptamer, greatly diminished hairpin formation (Ramsden et al., 1996), and therefore inhibited signal end transposition (data not shown). In contrast, inverse-transposition activity was only reduced by 10–20% by mutation of one of the first three heptamer positions. Even complete ablation of either the heptamer or nonamer (but not both) allowed ∼20% inverse-transposition activity. These data also confirmed our observation that hairpin formation on the RSS-containing oligonucleotide was not required for inverse transposition. Formation of a 'mixed' synaptic complex for inverse transposition Unlike other RAG1/2-mediated reactions, inverse transposition was inhibited in the presence of a pair of complementary RSSs. The requirement of an RSS and a non-RSS DNA, but not a 12/23 synaptic complex, suggested that the RAG1/2 proteins formed a 'mixed' synaptic complex with the non-RSS DNA substituting for one of the RSSs. To verify this hypothesis, we examined the inverse-transposition activity in the presence of competing unlabeled RSS substrates (Figure 6). Inverse-transposition activity was comparable with either the labeled 12 or 23 RSS, but the presence of an excess of unlabeled RSS oligonucleotide inhibited the reaction. To examine this inhibitory effect in more detail, we varied the concentration of unlabeled 12 or 23 RSS competitor in the reactions with a 3′-labeled 12 RSS target and a pBR322 donor. The number of sites involved in competition can be determined graphically by multisite inhibition analysis using a Hill plot (Segel, 1975). In this analysis the logarithm of A/(1 − A) was plotted against the logarithm of RSS concentration in nanomolar units, where A is the relative activity of inverse transposition. With the unlabeled 12 RSS competitor, inhibition showed linear dependence with a slope of approximately −1, suggesting single-site inhibition. On the other hand, the plot with the unlabeled 23 RSS competitor was curved with a limiting slope of approximately −1 at low 23 RSS concentrations, and approximately −2 at high 23 RSS concentrations. This difference between the two competitive inhibitors is due to more favorable formation of a 12/23 or 23/23 complex than a 12/12 complex (Jones and Gellert, 2002). The unlabeled 12 RSS only competed for the labeled 12 RSS binding site in an RAG1/2 complex that was capable of catalyzing inverse transposition, while the unlabeled 23 RSS competed for the binding sites of both the labeled 12 RSS and the plasmid DNA. These results support our model that the strand transfer of inverse transposition occurs in a mixed synaptic complex containing a single RSS and a non-RSS-containing DNA. The results also suggest that the binding site for the non-RSS DNA in this mixed synaptic complex is equivalent to that for an RSS. Figure 6.Multisite inhibition analysis of the unlabeled RSS competitor in inverse transposition. Inverse-transposition reactions with intact 3′-32P-12 RSS substrate and pBR322 were carried out as described in Figure 2. Inverse-transposition activity was measured as described in Figure 3 with an unlabeled 12 RSS (filled triangles, dashed line) or 23 RSS (open square, solid line) competitor at various concentrations. Log(A/(1 − A)) was plotted against log([RSS]), where A is relative activity and [RSS] is RSS concentration in nanomolar units. The data were fitted to linear dependence of a single slope of −0.98 or two slopes of −0.99 and −1.87, for the 12 or 23 RSS, respectively. The slope in each plot indicates the number of sites involved in competitive inhibition. Download figure Download PowerPoint Resolution of the branched intermediate by RAG1/2 As depicted in Figure 3A, inverse transposition generated a branched molecule consisting of a nicked RSS with its coding flank covalently linked to a non-RSS DNA. It is worth noting that this branched molecule is different from the signal-end transposition intermediate. To test whether RAG1/2 could further process the branched intermediate to yield a linear DNA, a branched molecule pre-assembled with oligonucleotides was used. All strands of the branched intermediate were individually 32P-labeled as depicted in Figure 7A. In the presence of RAG1/2, the top strand of the RSS-containing DNA was nicked at the RSS boundary (Figure 7B, 1 and 2), thus generating a nicked linear DNA consisting of the coding end and non-RSS DNA. We also tested if the 3′-OH group on the RSS heptamer could undergo transesterification and regenerate the RSS-containing DNA oligonucleotides and a broken non-RSS DNA, by a type of disintegration (Chow et al., 1992). The bottom strand of the signal sequence (34 nucleotides) and the bottom strand of the branched structure (47 nucleotides) were 5′- and 3′-end labeled, respectively, such that transesterification would yield a product of ∼50 nucleotides in both cases. However, no products of increased length were observed in either reaction (Figure 7B, 3 and 4), suggesting that nicking at the RSS boundary is the major pathway for resolution of this branched intermediate by RAG1/2. Figure 7.Resolution of the branched inverse-transposition intermediate. (A) Schematic presentation of the branched molecule used in this reaction. The position of labeling is indicated by a number, which corresponds to the reaction shown in (B). Thick and thin lines represent the RSS-containing and non-RSS sequences, respectively. An arrow indicates the nick introduced by RAG1/2 proteins. (B) Branched molecules assembled and labeled as shown in (A) were subjected to RAG1/2 protein for cleavage. The reaction conditions were as described in Figure 3. Predicted products of a nicking reaction were 16 and 34 nucleotides for substrate 1 and 2, respectively. Download figure Download
Referência(s)