Portal de Periódicos da CAPES

Artigo Produção Nacional Revisado por pares

BIBTEX RIS

Report of the key comparison APMP.QM-K19. APMP comparison on pH measurement of borate buffer

2014; IOP Publishing; Volume: 52; Issue: 1A Linguagem: Inglês

10.1088/0026-1394/52/1a/08003

1681-7575

Akiharu Hioki, Toshiaki Asakai, I. I. Maksimov, Toshihiro Suzuki, Tsutomu Miura, Krairerk Obromsook, Nongluck Tangpaisarnkul, Patumporn Rodruangthum, Siu-kay Wong, Wai-Hing Lam, Osman Zakaria, Khirul Anuar Mohd. Amin, Ngo Huy Thanh, Michal Máriássy, L Vyskočil, Zuzana Hanková, Paola Fisicaro, Daniela Stoica, Nahar Singh, Daya Soni, G T Canaza, Viatcheslav Kutovoy, Fabiano Barbieri Gonzaga, Júlio Cesar Dias, Alena Vospělová, Nickolay Bakovets, Bibinur Zhanasbayeva,

Scientific Measurement and Uncertainty Evaluation

The APMP.QM-K19 was organised by TCQM of APMP to test the abilities of the national metrology institutes in the APMP region to measure a pH value of a borate buffer. This APMP comparison on pH measurement was proposed by the National Metrology Institute of Japan (NMIJ) and the National Institute of Metrology (Thailand) (NIMT) at the APMP-TCQM meeting held 26?27 November 2012. After approval by TCQM, the comparison has been conducted by NMIJ and NIMT. The comparison is a key comparison following CCQM-K19 and CCQM-K19.1. The comparison material was a borate buffer of pH around 9.2 and the measurement temperatures were 15 ?C, 25 ?C and 37 ?C. This is the second APMP key comparison on pH measurement and the fourth APMP comparison on pH measurement following APMP.QM-P06 (two phosphate buffers) in 2004, APMP.QM-P09 (a phthalate buffer) in 2006 and APMP.QM-K9/APMP.QM-P16 (a phosphate buffer) in 2010?2011. The results can be used further by any participant to support its CMC claim at least for a borate buffer. That claim will concern the pH method employed by the participant during this comparison and will cover the used temperature(s) or the full temperature range between 15?C and 37 ?C for the participant which measured pH values at the three temperatures. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).