Portal de Periódicos da CAPES

Interfacial microstructure of induction brazed joints of TiAl-based intermetallics to steel 35CrMo with AgCuNiLi filler

2005; Elsevier BV; Volume: 408; Issue: 1-2 Linguagem: Inglês

10.1016/j.msea.2005.08.009

1873-4936

Peng He, J.C. Feng, Wenchen Xu,

Advanced Welding Techniques Analysis

TiAl-based intermetallics joined by induction brazing using Ag–Cu–Ni–Li filler at 850–970 °C for 1–10 min was investigated. According to the experimental observations, when the brazing temperature is low and the brazing time is short, the joint microstructure is TiAl alloy/AlCuTi with TiCu/Ag-base solid solution + AlCu2Ti with TiCu/Cu-rich phase/Al(Cu, Ni)2Ti phase with (Cu, Ni)–Ti/Ag–Cu hypoeutectic microstructure/diffusion layer close to steel (FeTi phase contained)/35CrMo steel; when the brazing temperature is low and the brazing time is long, the joint microstructure is TiAl/AlCuTi with TiCu/AlCu2Ti with TiCu/Ag-base solid solution + AlCu2Ti with TiCu/Ag-base solid solution + Al(Cu, Ni)2Ti phase with (Cu, Ni)–Ti/diffusion layer close to steel/35CrMo steel; when the brazing temperature is high and the brazing time is short, the joint microstructure is TiAl alloy/AlCuTi with TiCu/AlCu2Ti with TiCu/Cu-base solid solution + Ag-base solid solution/(AlCu2Ti phase with TiCu + Cu-base solid solution) + Ag-base solid solution/Al(Cu, Ni)2Ti phase with (Cu, Ni)–Ti (Ag solid solution) + Ag-base solid solution/diffusion layer close to steel/35CrMo steel.