MoSi2 coating on molybdenum using molten salt
2000; Elsevier BV; Volume: 306; Issue: 1-2 Linguagem: Inglês
10.1016/s0925-8388(00)00792-1
ISSN1873-4669
AutoresRyosuke O. Suzuki, Masayori Ishikawa, Katsutoshi Ono,
Tópico(s)MXene and MAX Phase Materials
ResumoFor obtaining oxidation resistance of molybdenum in air, molybdenum silicide was non-electrolytically coated in the molten salt, where a disproportion reaction occurs between the salt composed of NaCl–KCl–NaF–Na2SiF6–SiO2 and the Si powder. Hexagonal MoSi2 was formed as single phase with homogeneous thickness of tens of μm above 1073 K, while the tetragonal MoSi2 phase was additionally formed at 973 K. The growth rate of the MoSi2 layer and its morphology at the sample corner were affected by this phase formation. The protective layer on the siliconized sample proved to be effective for preventing oxidation that occurs for pure molybdenum at low temperatures. During the oxidation at the high temperature, Mo5Si3 was formed at the interface between the Mo substrate and the MoSi2 layer.
Referência(s)