Portal de Periódicos da CAPES

High speed ball nose end milling of hardened AISI A2 tool steel with PCBN and coated carbide tools

2013; Elsevier BV; Volume: 15; Issue: 4 Linguagem: Inglês

10.1016/j.jmapro.2013.05.005

2212-4616

Z. Pu, Anshul Singh,

Tribology and Wear Analysis

High speed machining (HSM) of tool steels in their hardened state is emerging as an attractive approach for the mold and die industry due to its potential for significant cost savings and productivity improvement. An experimental study was conducted to investigate the tool wear mechanism and surface integrity in high speed ball nose end milling of hardened AISI A2 tool steel using coated tungsten carbide and polycrystalline cubic boron nitride (PCBN) tools. It is found that coated carbide tools can only be used at low speed (120 m/min) while high content PCBN tools are suitable for HSM range (470 m/min). PCBN tools produce a damage free workpiece with better surface finish and less work hardening. Despite the higher tool cost, HSM with PCBN tools lead to reduction in both total cost and production time per part.