Artigo Acesso aberto Revisado por pares

Transmission electron microscopy characterization of laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft

2007; Elsevier BV; Volume: 461; Issue: 1-2 Linguagem: Inglês

10.1016/j.jallcom.2007.07.079

ISSN

1873-4669

Autores

Xiubo Liu, Ming Pang, Jian Guo, Gang Yu,

Tópico(s)

Microstructure and Mechanical Properties of Steels

Resumo

Microstructure characterization is important for controlling the quality of laser welding. In the present work, a detailed microstructure characterization by transmission electron microscopy was carried out on the laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft and an unambiguous identification of phases in the weldment was accomplished. It was found that there are γ-FeCrNiC austenite solid solution dendrites as the matrix, (Nb, Ti) C type MC carbides, fine and dispersed Ni3 Al γ′ phase as well as Laves particles in the interdendritic region of the seam zone. A brief discussion was given for their existence based on both kinetic and thermodynamic principles.

Referência(s)