Portal de Periódicos da CAPES

Friction stir spot welding of AA 1050 Al alloy and hot stamped boron steel (22MnB5)

2010; Maney Publishing; Volume: 15; Issue: 8 Linguagem: Inglês

10.1179/136217110x12785889549462

1743-2936

A. A. M. da Silva, Egoitz Aldanondo, Pedro Álvarez, Ekaitz Arruti, Alberto Echeverría,

MXene and MAX Phase Materials

The present study investigates the effect of joining parameters on the microstructural and mechanical characteristics of dissimilar friction stir spot welding (FSSW) between AA 1050 Al and 22MnB5 hot stamped boron steel. Mechanical performance has been evaluated by shear and microhardness testing. Optical microscopy has been used to investigate the microstructure generated in the different FSSW regions. A macrostructural examination has revealed the creation of mechanical interlocking in the Al steel connections. No volumetric defects or any other imperfection has been found in all FSSW connections. Shear failure load has increased with increasing both tool rotational speed and plunge depth for all FSSW connections. Higher plunge depth has improved the mechanical interlocking between lower and upper sheet due to the formation of a larger secondary flash. Encouraging results have been obtained using coated WC–Co tools in terms of durability and joint performance.