Portal de Periódicos da CAPES

Cathodic polarization curves of the oxygen reduction reaction on various structural materials of boiling water reactors in high temperature–high purity water

2012; Taylor & Francis; Volume: 49; Issue: 5 Linguagem: Inglês

10.1080/00223131.2012.676880

1881-1248

Masahiko Tachibana, Kazushige Ishida, Yoichi Wada, Ryōsuke Shimizu, Nobuyuki Ota, Nobuyoshi Hara,

Corrosion Behavior and Inhibition

Cathodic polarization curves of the O2 reduction reaction were measured by using electrodes made from typical structural materials of boiling water reactors (BWRs) to evaluate the effects of kind of material on the electrochemical corrosion potential (ECP) calculation. To estimate ECPs at any region in the BWRs on the basis of the BWR environmental conditions, anodic and cathodic polarization curves should be obtained in advance under relevant conditions. The concentration of oxidants such as O2 and H2O2 in coolant changes depending on the region in which they exist. As well, reduction reaction rates might differ depending on the kind of materials. In this work, the cathodic polarization curves of type 316L stainless steel (316L SS) and Alloy 182 were measured in high purity water at 553 K with different O2 concentrations and compared with those of type 304 SS (304 SS). The results showed that the cathodic polarization curves differed depending on the kind of materials at the activation-controlled region. But, the difference in the ECP vs. O2 concentration relationship was small when the ECPs were calculated by using both anodic and cathodic polarization curves measured on the objective material.