Adsorptive removal of cadmium(II) ions from liquid phase using acid modified carbon-based adsorbents
2015; Elsevier BV; Volume: 204; Linguagem: Inglês
10.1016/j.molliq.2015.01.033
ISSN1873-3166
AutoresIhsanullah Ihsanullah, Fahad Abdulaziz Al-Khaldi, B. Abu‐Sharkh, Mazen Khaled, Muataz Ali Atieh, Mustafa S. Nasser, Tahar Laoui, Tawfik A. Saleh, Shilpi Agarwal, Inderjeet Tyagi, Vinod Kumar Gupta,
Tópico(s)Extraction and Separation Processes
ResumoThis work reports a comprehensive study of the adsorption characteristics of cadmium(II) on modified structures of carbon nanotubes (CNTs), carbon nanofibres (CNFs), activated carbon (AC), and fly ash (FA). The characterization was performed using field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA) and Brunauer–Emmett–Teller (BET) surface analysis. Several experimental parameters; adsorbent dosage, pH, and agitation speed and contact time, were investigated for their effects on the adsorption of cadmium(II) from water. The optimum conditions of 2 h of contact time, pH 7, 50 mg adsorbent dosage and 150 rpm rotational speed were observed. Models of first-order, second-order and pseudo-second-order were fitted to the experimental data, and pseudo-second-order kinetics were observed to describe the adsorption of cadmium(II) on these adsorbents. The adsorption behaviours of cadmium(II) were evaluated using the Freundlich and Langmuir isotherm models. The maximum adsorption capacities of the modified adsorbents were observed to be 2.02 mg/g, 1.98 mg/g, 1.22 mg/g and 1.58 mg/g, for CNTs, AC, CNFs and FA, as obtained from Langmuir isotherm models. It was determined that surface modification of the CNTs, CNFs, and AC enhanced their adsorption efficiency. The results obtained are promising for the use of these modified materials with respect to water purification applications.
Referência(s)