Effect of plastic strain on grain size of ferrite transformed from deformed austenite in Si-Mn steel
2001; Maney Publishing; Volume: 17; Issue: 12 Linguagem: Inglês
10.1179/026708301101509647
ISSN1743-2847
AutoresT. Inoue, Shiro Torizuka, Kotobu Nagai, Kaneaki Tsuzaki, Tetsuya OHASHI,
Tópico(s)Microstructure and mechanical properties
ResumoThe effect of plastic strain on the grain size of ferrite transformed from deformed and unrecrystallised austenite has been investigated for a low carbon Si-Mn steel. An explicit finite element technique was used to evaluate the plastic strain distribution introduced by deformation in a specimen. The specimen was compressed by a pair of anvils controlled to keep the strain rate constant. The contact condition between the anvil and the specimen was determined by the experimental result from an identically deformed screw set in the specimen. The interrelation between the equivalent plastic strain epsiloneq, numerically obtained in the range 0.1<epsiloneq<4.2, and the experimental grain size of 2-9 m was analysed. The change in ferrite grain size caused by epsiloneq in the unrecrystallised austenite region has been discussed.
Referência(s)