Carbon Dioxide Corrosion of Carbon Steel in Two-Phase Flow
1994; Volume: 50; Issue: 9 Linguagem: Inglês
10.5006/1.3293548
ISSN1938-159X
Autores Tópico(s)Erosion and Abrasive Machining
ResumoAbstract Results were presented from a four-year experimental study on carbon dioxide (CO2) corrosion of carbon (C) steel in two-phase flow. Tests were carried out in a gas and water loop that permitted control and regulation of relevant parameters. Flow rates of gas and water were regulated independently to obtain a number of two-phase flow regimes, such as bubble flow and slug flow. In more than 20 long-term experiments lasting from one to several weeks each, pH was varied from 4 to 7 while the temperature was held at 20°C, 40°C, 60°C, and 80°C in different experiments. Corrosion rates were monitored continuously in time with a radiation detection technique. Scanning electron microscopy analysis and x-ray analysis of the specimen surface and cross section were done on selected specimens after each experiment. It was found that, in cases where the formation of protective films is difficult, flow could have a “positive” role by eroding the iron carbide films that otherwise would accelerate corrosion by ga...
Referência(s)