Dislocation substructures developed during dynamic recrystallisation in polycrystalline nickel
1990; Maney Publishing; Volume: 6; Issue: 12 Linguagem: Inglês
10.1179/mst.1990.6.12.1251
ISSN1743-2847
AutoresTetsuo Sakai, Masayuki Ohashi,
Tópico(s)Advanced materials and composites
ResumoAbstractAbstractThe dislocation substructures developed during dynamic recrystallisation (DRX) were studied by means of tensile tests and metallographic observations on polycrystalline nickel. The average cell size in the homogeneous substructures decreased rapidly with straining to about half the peak strain, whereupon DRX nuclei began to form. The average cell size then approached a constant value for increasing strain. Full DRX substructures were distributed heterogeneously throughout all areas, and were classifiable into three categories: (i) DRX nuclei, (ii) growing DRX grains containing a dislocation density gradient, and (iii) large DRX grains with a fairly homogeneous substructure. The average cell size in region (iii) could be expressed as a function of either the peak flow stress or the DRX grain size. The relationship between these microstructures and flow behaviour under DRX are discussed in detail.MST/1285
Referência(s)