Hydrogen and temper embrittlement in 9Cr–1Mo steel
1988; Maney Publishing; Volume: 4; Issue: 9 Linguagem: Inglês
10.1179/mst.1988.4.9.791
ISSN1743-2847
AutoresC. A. Hippsley, N. P. Haworth,
Tópico(s)High Temperature Alloys and Creep
ResumoAbstractAbstractThe synergism between hydrogen embrittlement and temper embrittlement has been investigated in a 9Cr–1Mo martensitic steel. Measurements of tensile ductility were used to monitor the development of embrittlement with increasing hydrogen content in material as tempered and aged for up to 5000 h at 500 or 550°C. A detailed examination was made of associated changes in fracture mechanism, precipitate microstructure, and interfacial and precipitate chemistry. A strong interaction between hydrogen and temper embrittlement was observed. Both types of embrittlement in isolation reduced tensile ductility by promoting a ductile interlath fracture mechanism: 'chisel fracture'. Hydrogen and temper embrittlement acted synergistically to reduce ductility further by the promotion of brittle intergranular fracture and transgranular cleavage. The dominant factor controlling the interaction was the precipitation of a brittle intermetallic Laves phase containing phosphorus in solution. Phosphorus segregated to interfaces was considered to make an important, but secondary, contribution to the embrittlement observed.MST/791
Referência(s)