Glyphosate and AMPA Analysis in Sewage Sludge by LC-ESI-MS/MS after FMOC Derivatization on Strong Anion-Exchange Resin as Solid Support
2007; American Chemical Society; Volume: 79; Issue: 10 Linguagem: Inglês
10.1021/ac062195k
ISSN1520-6882
AutoresAline Ghanem, Philippe Bados, Lucien Kerhoas, Jacqueline Dubroca, Jacques Einhorn,
Tópico(s)Environmental Toxicology and Ecotoxicology
ResumoAn innovative analytical method has been developed for the determination of glyphosate and aminomethylphosphonic acid (AMPA), its major metabolite, in sewage sludge. This method involved an alkaline extraction from sludge and purification on a strong anion-exchange resin. While the analytes remained fixed by ionic interactions, an "on-solid support" derivatization by FMOC−Cl was carried out. This versatile approach allowed a 10 min reaction and simple elimination of the excess of reagent. The resulting derivatives remained retained by ionic and hydrophobic interactions with the resin until being eluted by a mixed NaCl water/acetonitrile, 70/30, v/v, solution. After an appropriate dilution and adjustment of the pH, the sample was concentrated on an Oasis HLB solid-phase cartridge. For quality analysis of traces in complex matrixes, LC-ESI-MS/MS in the multiple reaction monitoring positive mode was used fulfilling the European Union requirements (Decision 2002/657/CE). To overcome the matrix effects, stable isotopically labeled standards were added to the sludge extracts as internal standards and were thus derivatized during the procedure in parallel to the analytes. Mean recovery values were 70% ± 7% for glyphosate and 63% ± 3% for AMPA. Limits of detection (20 and 30 ppb dw) and limits of quantification (35 and 50 ppb dw) for glyphosate and AMPA, respectively, were sufficient to monitor samples taken from Ile-de-France wastewater treatment plants where contamination currently reached 0.1−3 ppm and 2−35 ppm dw for glyphosate and AMPA, respectively.
Referência(s)